clothes still wet after cycle spin Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 11026834691	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

biho		#1 Posted : Friday, December 25, 2015 8:35:07 PM(UTC)
Rank: Member Groups: Registered Joined: 9/30/2012(UTC) Posts: 6		Hi, My Kenmore top load washer have a problem. After the cycle spin, the clothes still wet. I did checked, that nothing stuck in drain pump, the motor coupler is ok. Anyone have any idea? thanks
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

sidfink43		#2 Posted : Sunday, December 27, 2015 12:02:23 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Probably the clutch lining. It is an easy repair although it will help to have a helper. The part is also inexpensive.
User Profile View All Posts by User View Thanks

biho		#3 Posted : Sunday, December 27, 2015 3:16:44 PM(UTC)
Rank: Member Groups: Registered Joined: 9/30/2012(UTC) Posts: 6		Clutch lining is clutch assembly, is that correct?
User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Sunday, December 27, 2015 4:14:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		The clutch lining is part of the assembly and comes out with just squeezing it. Unless there is a problem with the clutch assembly I recommend just replacing the liner as there is less to go wrong with your repair. Also check to make sure the brakes are releasing, but if it is turning slowly the clutch lining should be all you need to replace.
User Profile View All Posts by User View Thanks

biho		#5 Posted : Wednesday, December 30, 2015 7:56:00 AM(UTC)
Rank: Member Groups: Registered Joined: 9/30/2012(UTC) Posts: 6		Hi,I just ordered and replaced complete clutch assembly , It seem working fine with small or medium load. When I set to large load , clothes stiil little wet after spin cycle?
User Profile View All Posts by User View Thanks

sidfink43		#6 Posted : Wednesday, December 30, 2015 8:29:18 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Try operating it with the cabinet off and the lid switch by passed. Put in a large load and see if the problem is with the spin speed or something else.
User Profile View All Posts by User View Thanks

biho		#7 Posted : Tuesday, January 12, 2016 9:01:23 AM(UTC)
Rank: Member Groups: Registered Joined: 9/30/2012(UTC) Posts: 6		It seem the machine not spin full speed to dry clothes
User Profile View All Posts by User View Thanks

biho		#8 Posted : Tuesday, January 12, 2016 9:03:00 AM(UTC)
Rank: Member Groups: Registered Joined: 9/30/2012(UTC) Posts: 6		The problem only in large load
User Profile View All Posts by User View Thanks

sidfink43		#9 Posted : Tuesday, January 12, 2016 12:45:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Well this is a mystery. Check the brakes, but honestly if it is not the clutch I am kinda at a lost based on the info.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)