Maytag series 200 issue - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Maytag series 200 issue Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MDBTT50AWS	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

pete385		#1 Posted : Friday, October 23, 2015 8:28:31 AM(UTC)
Rank: Member Groups: Registered Joined: 10/23/2015(UTC) Posts: 2		Door latch was broken, received new latch this AM and installed... Dishwasher fills and then attempts to cycle 4 times ( and hear it run and water is spraying) it then shuts off and drains. Yes the old latch was broken and that was why I replaced it.On a side note I called parts pro yesterday around 10am and had the new latch today before 11am..


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

pete385		#2 Posted : Saturday, October 24, 2015 5:55:21 AM(UTC)
Rank: Member Groups: Registered Joined: 10/23/2015(UTC) Posts: 2		Press "start/cancel" Unit fills and cycles 4 times for approx 3.5 sec per cycle (pump runs and water sprays) then dishwasher stops and lights on display go off. It does not restart.. Press "start/cancel" dishwasher fills for approx 10 secs. lights stay lit but does not attempt to cycle.... Press "start/cancel" again and lights go out and dishwasher empties....


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close