Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
ASarno  
#1 Posted : Thursday, October 8, 2015 2:31:55 PM(UTC)
ASarno

Rank: Member

Groups: Registered
Joined: 10/8/2015(UTC)
Posts: 4

The "LID" light message came on and the washer did not start.
I replaced the lid magnet/magnet assembly and also replaced the control board. The "lid" error still comes on and does not start. What next?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Friday, October 9, 2015 8:41:58 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

What you did should have fixed it. Try using a meter to check continuity in the wiring, that could be your problem although it is not likely. Also, use a separate magnet to see if you can make the light go away.
ASarno  
#3 Posted : Friday, October 9, 2015 9:54:40 AM(UTC)
ASarno

Rank: Member

Groups: Registered
Joined: 10/8/2015(UTC)
Posts: 4

open the lid and put a magnet on the magnet on the washer top?
sidfink43  
#4 Posted : Friday, October 9, 2015 12:16:00 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Yep, that will fool it. It's okay to fool it
ASarno  
#5 Posted : Friday, October 9, 2015 1:31:40 PM(UTC)
ASarno

Rank: Member

Groups: Registered
Joined: 10/8/2015(UTC)
Posts: 4

I tried the magnets. It still shows the "lid" error.
I'll get a meter to check the wiring.
Is there a way to reset it?
sidfink43  
#6 Posted : Friday, October 9, 2015 2:30:50 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

No, checking the wiring is about the only thing I can think of now
ASarno  
#7 Posted : Monday, October 12, 2015 1:46:23 AM(UTC)
ASarno

Rank: Member

Groups: Registered
Joined: 10/8/2015(UTC)
Posts: 4

I checked the wiring with a meter and everything is ok.
I had a friend check the wiring throughout and everything checked out.
Running out of ideas.
sidfink43  
#8 Posted : Monday, October 12, 2015 4:14:45 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Yeah, me too. You could be looking at a mode shifter problem, but not sure why that would give you that error code.

It may be time for a new washer, sorry to say. These GE's with this technology are just a nightmare sometimes.
Users browsing this topic
Guest (4)
Similar Topics
GE Profile Oven heating very slowly (Oven Repair (including Ranges and Cooktops))
by Reddogmatic 6/23/2024 4:53:08 PM(UTC)
GE Profile Washer not draining and water not hot (Dishwasher Repair)
by Guest 6/8/2024 9:00:21 AM(UTC)
GE profile smart (Washer Repair)
by Guest 4/15/2024 4:35:38 AM(UTC)
Ref - GE Profile Range Model No. PS950EF3ES (Oven Repair (including Ranges and Cooktops))
by JimBAgde 4/6/2024 11:11:04 AM(UTC)
GE Profile Freezer Wildly Varying Temps (Refrigerator & Freezer Repair)
by Guest 3/26/2024 3:54:40 PM(UTC)
Water dispenser not working GE Profile PSHs6TGXBDS (Refrigerator & Freezer Repair)
by klkaylor78 2/3/2024 11:07:08 AM(UTC)
GE Profile PSC23SGPA (Refrigerator & Freezer Repair)
by dwhit 10/3/2023 10:25:11 AM(UTC)
Whirr whirr whirring sound from my GE Profile PFE28RSHHSS refrigerator (Refrigerator & Freezer Repair)
by Guest 4/29/2023 7:48:19 AM(UTC)
GE Profile refrigerator PY model - chime not working (Refrigerator & Freezer Repair)
by Guest 2/7/2023 8:07:10 AM(UTC)
GE Profile erratic temperatures (Refrigerator & Freezer Repair)
by david2u 2/4/2023 9:51:52 AM(UTC)
Buy (300 Pieces) New GE Profile - Opal 2.0 38-lb. Ice Maker Dispenser $134,700 (General Talk)
by eikohajime30 1/4/2023 11:05:58 PM(UTC)
Dishwasher Repair for GE profile (Dishwasher Repair)
by Guest 12/10/2022 11:15:25 AM(UTC)
GE Profile Range Timer Button Not Working (Oven Repair (including Ranges and Cooktops))
by Bush444 11/23/2022 10:11:35 AM(UTC)
Dishwasher GE PROFILE MODEL PDT825SSJSS (Dishwasher Repair)
by apeconsulting 9/13/2022 9:02:22 PM(UTC)
GE Profile ice maker intermittently worked, now completely dead (Refrigerator & Freezer Repair)
by wolfpack95 8/29/2022 7:27:03 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.