Vent Thermal Fuse blow immediately - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Vent Thermal Fuse blow immediately Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: EIED55HIW	Brand: Electrolux	Age: 5 - 10 years
Previous Topic Next Topic

dagnytaggart		#1 Posted : Wednesday, August 19, 2015 6:12:58 PM(UTC)
Rank: Member Groups: Registered Joined: 8/19/2015(UTC) Posts: 1		Hello, I've searched the forum and couldn't find this scenario. It started with E63. The heater element was in really bad shape. The fuses on heater element were all good. Replaced the heater element. Plugged it back it. E66. Pulled it back apart. The thermal fuse on the vent was bad - no continuity. Hunted down a new one. Checked new fuse before installing - it was good. Put the dryer back together. Plugged it in. Turned the knob to get a display. E66 again. The thermal fuse immediately blew. Traced wiring to look for any damage or shorts. Nothing noticeable. Pulled out PCB from Control box. Nothing looks bad. What now? This is rough with a kid in potty training phase. Thanks all.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close