Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
markw42  
#1 Posted : Monday, May 18, 2009 4:16:05 PM(UTC)
markw42

Rank: Member

Groups: Registered
Joined: 5/18/2009(UTC)
Posts: 1

I was replacing the heating element, the lid slipped and fell pulling 4 wires from the timer a white one, black, orange and red. I am not sure in which order they go back can anyone help?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Drags1998  
#2 Posted : Monday, May 18, 2009 4:31:56 PM(UTC)
Drags1998

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750

Look at the timer, It should have small letters next to the terminals W=white, R=red and so on. if not look on the wire and see if there are #'s on the wire.:)
denman  
#3 Posted : Tuesday, May 19, 2009 3:36:53 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Similar Topics
Need help with wiring (Oven Repair (including Ranges and Cooktops))
by rdef 8/8/2014 12:58:50 PM(UTC)
Help with wiring new R/F burner switch (Oven Repair (including Ranges and Cooktops))
by brh57 4/16/2012 1:29:23 PM(UTC)
Help with wiring on drier (Dryer Repair)
by rarichardson@myclearwave. 1/12/2011 2:38:19 PM(UTC)
Help with wiring on a Kenmore 70 series (Dryer Repair)
by kenmore70 3/12/2010 8:13:17 PM(UTC)
Need help with wiring (Washer Repair)
by Qapla 5/20/2009 5:30:17 AM(UTC)
help with wiring door switch (Dryer Repair)
by champcar50 10/5/2008 3:03:08 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.