Need LP conversion kit needed! - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Need LP conversion kit needed! Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KGST300BWH2	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

wickcheed		#1 Posted : Tuesday, July 21, 2015 2:13:29 PM(UTC)
Rank: Member Groups: Registered Joined: 7/21/2015(UTC) Posts: 2		Hello! Just bought a KGST300BWH2. I need to convert to LP from NG, but the kit part# 9751844 is discontinued and unavailable at retailers. Anyone with one of these stoves able to sell me the kit that came with the unit? Or at least point me in some positive direction. Any help would be greatly appreciated. Thanks so much.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Thursday, July 23, 2015 7:59:27 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		I do not know where you can get a kit but perhaps the instruction sheet that comes in the kit may be useful to you. Please see the attachment
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

wickcheed		#3 Posted : Tuesday, July 28, 2015 8:18:31 AM(UTC)
Rank: Member Groups: Registered Joined: 7/21/2015(UTC) Posts: 2		Hi: Thanks for that PDF ... a bit different than the one I have. But still same roadblock, the orifices aren't made anymore. Are there any options here? Are orifices so unique to the stove that some other brand's would NOT work with it? Is it just a matter of diameter, or are other specs at play here? Thanks!


User Profile View All Posts by User View Thanks

denman		#4 Posted : Wednesday, July 29, 2015 1:53:16 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Yes it is not just about the diameter. The orifice has to have the same orifice size, outside diameter and thread.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close