Replacement of Blower Wheel on a Admiral Electric Dryer - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Replacement of Blower Wheel on a Admiral Electric Dryer Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Admiral	Age: More than 10 years
Previous Topic Next Topic

Davo67		#1 Posted : Tuesday, May 12, 2009 12:40:51 PM(UTC)
Rank: Member Groups: Registered Joined: 5/12/2009(UTC) Posts: 2		Hello, I have a Admiral electric dryer Model # LNC8745A71 and I need to replace the Blower Wheel. I was wondering if someone could please help me out with some info on how to do this. Is this a job that I could do myself or is it very complicated and best left to a pro? Any help in this matter would be greatly appreciated. Thanks in advance. Sincerely, Dave Espinoza. PS the model # of the blower wheel here at Appliance Parts Pro is AP4038116.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Thursday, May 14, 2009 3:54:10 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Hi Davo Sorry it has taken so long to get back to you but I have not been able to find this model on the Maytag (Maytag makes Admiral) site. If you model is a standard Maytag/Admiral dryer then this should be an easy job for you. Take off the front panel to get to the blower. Then remove the blower cover and you will see that the blower is held on by a clip which can be removed and a clamp which can be compressed and removed. That should allow you to take off the blower. Good luck, and let us know how it turns out.


User Profile View All Posts by User View Thanks

Davo67		#3 Posted : Sunday, May 17, 2009 3:50:13 PM(UTC)
Rank: Member Groups: Registered Joined: 5/12/2009(UTC) Posts: 2		Hello sidfink43, I followed your instructions and was able to successfully replace the blower wheel. Thank you for your assistance in this matter. Sincerely, David Espinoza.


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Sunday, May 17, 2009 4:03:25 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Fantastic, glad you got it done, and thanks for updating us.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close