KitchenAid Dishwasher runs but doesn't clean - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

KitchenAid Dishwasher runs but doesn't clean Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDP02CRBS2	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

barberd		#1 Posted : Monday, May 4, 2015 11:44:59 AM(UTC)
Rank: Member Groups: Registered Joined: 11/11/2010(UTC) Posts: 12		Dishwasher suddenly isn't cleaning. Control panel works, sounds like it's running it's cycle, but nothing gets cleaned. I've tried running it, and opening the door mid cycle to see what's going on, and there's no sprayer action. Looks/sounds like it fills, and then drains just fine, but not spraying at all. Any ideas? I'm pretty solid at repairing most anything, but curious if this is something an above average homeowner/handyman can tackle. Thank you!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Jeff / APP Team		#2 Posted : Tuesday, May 5, 2015 5:57:37 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		Hello Barberd. It sounds like the sump assembly on the unit will need to be replaced. Here is the part number for you. Part number: AP5962283


User Profile View All Posts by User View Thanks

barberd		#3 Posted : Tuesday, May 5, 2015 2:15:03 PM(UTC)
Rank: Member Groups: Registered Joined: 11/11/2010(UTC) Posts: 12		Watched the video, and that looks like the right fix. Unfortunately, the part is out of stock, but thanks a ton. I'll see if I can find one.


User Profile View All Posts by User View Thanks

barberd		#4 Posted : Sunday, May 10, 2015 10:05:21 PM(UTC)
Rank: Member Groups: Registered Joined: 11/11/2010(UTC) Posts: 12		Replaced the sump/motor and that definitely fixed the problem. Thank you for the great advice!! Unfortunately after running the first cycle, I got a flashing Clean light. Did a reset on the control panel and got it started up again, and the water isn't heating. Is there something I may have done wrong, or accidentally disconnected during the sump/motor replacement? Thanks again.


User Profile View All Posts by User View Thanks

Jeff / APP Team		#5 Posted : Monday, May 11, 2015 4:32:13 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		Check the wiring to the heater and the thermostat. Make sure they are on the terminals good. Also, look at where it goes into the door and make sure none of the wires got damaged.


User Profile View All Posts by User View Thanks

barberd		#6 Posted : Monday, May 11, 2015 7:01:56 PM(UTC)
Rank: Member Groups: Registered Joined: 11/11/2010(UTC) Posts: 12		thanks Jeff! Must have been a fluke thing. I re-ran the dishwasher, and it heated up just fine. Have run a couple cycles and it seems to have no issues.


User Profile View All Posts by User View Thanks

Jeff / APP Team		#7 Posted : Tuesday, May 12, 2015 3:44:18 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		Great!! Glad we could help you get back up and running again!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close