Dryer does not turn has power to plug and unit - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Dryer does not turn has power to plug and unit Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KEYS850JQ0	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

wxperez		#1 Posted : Sunday, May 17, 2009 6:11:06 AM(UTC)
Rank: Member Groups: Registered Joined: 5/17/2009(UTC) Posts: 2		I checked for power at the wall plug everything good there, I checked for power at the dryer end everything good there. I can turn on the timer and it is working but unit will not start when I it hit the start button.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Sunday, May 17, 2009 8:19:31 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL KEYS850JQ0 \| AppliancePartsPros.com Here is a wiring diagram https://www.servicematters.com/d...0Sheet%20-%203406681.pdf Could be the door switch, the push-to-start relay or the temp fuse. Fuse is Item 6 in Section 3, mounted to the back of the blower. Unplug the unit, unplug one wire going to the fuse and check the fuse for continuity. Since you checked power I am assuming you have a meter. Replace it as it is a critical safety device. If it is blown clean the interior of the machine including the blower wheel. Also clean and check your vent system. These are the most common causes for it blowing though there are others.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

wxperez		#3 Posted : Sunday, May 24, 2009 7:09:35 AM(UTC)
Rank: Member Groups: Registered Joined: 5/17/2009(UTC) Posts: 2		I want to say thank you denman for your help, as per your advise I replaced the temp fuse and my dryer is now repaired. This was my first time on this forum and it works great. Parts were easy top order, shipped timley and the response's were quick. I know I saved hundreds of dollars by using this forum, again thanks for everyones help!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close