Whirlpool leaking from Inlet Valve - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool leaking from Inlet Valve Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSF26C4EXB02	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

dbayducks		#1 Posted : Sunday, February 8, 2015 11:58:28 AM(UTC)
Rank: Member Groups: Registered Joined: 11/9/2008(UTC) Posts: 10		My dishwasher is leaking during the fill cycle. We pulled it out and found the leak is coming from the Inlet Valve. We took it off and cleaned the scale that had built up around the O-ring. We put it back together and tried it, but it is still leaking. The O-ring looks ok, but the outer side of it feels rough or textured. The inside of the O-ring is smooth. Should both sides be smooth? I have also noticed a little bit of scale built up on the right side tabs where the top piece clicks in. When we ran it I did not see any water coming from the top. It was just from the sides of where the valve screws together. Is this just needing a new O-ring gasket or do I need a whole new valve? Thanks for your help! I posted the wrong model # earlier. The correct one is GU1108XTLQO


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Monday, February 9, 2015 1:15:04 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		The given model number comes up as a refrigerator. I would replace the valve.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

dbayducks		#3 Posted : Monday, February 9, 2015 5:50:50 AM(UTC)
Rank: Member Groups: Registered Joined: 11/9/2008(UTC) Posts: 10		I listed the wrong model number earlier. The correct one is GU1108XTLQO Thanks for the response.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close