Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jwieland  
#1 Posted : Thursday, September 11, 2014 7:31:34 AM(UTC)
jwieland

Rank: Member

Groups: Registered
Joined: 4/24/2014(UTC)
Posts: 11

My wife said that when she tried to start our dishwasher, the red light about the button she pushed, "Heavy Wash", came on briefly and went out, and the dishwasher didn't start. Now no lights come on at all. I tried turning off the power to it for about 30 minutes to reset the controller, but it still does nothing. I'm thinking keypad or logic board?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jwieland  
#2 Posted : Saturday, February 7, 2015 11:05:21 AM(UTC)
jwieland

Rank: Member

Groups: Registered
Joined: 4/24/2014(UTC)
Posts: 11

I was hoping to get some advice on how to proceed. From what I've seen, it's either the circuit board or the keypad. There's an outside chance that it's the door switch.
jwieland  
#3 Posted : Saturday, February 7, 2015 1:10:55 PM(UTC)
jwieland

Rank: Member

Groups: Registered
Joined: 4/24/2014(UTC)
Posts: 11

This is a picture that we took of the circuit board:
UserPostedImage
jwieland  
#4 Posted : Saturday, February 7, 2015 1:43:54 PM(UTC)
jwieland

Rank: Member

Groups: Registered
Joined: 4/24/2014(UTC)
Posts: 11

There's supposed to be a series 10, series 11, and series 24 for this D/W. The serial number for ours is 13231730YB.
jwieland  
#5 Posted : Monday, February 23, 2015 5:59:59 PM(UTC)
jwieland

Rank: Member

Groups: Registered
Joined: 4/24/2014(UTC)
Posts: 11

It was the board. I replaced it, and it's working fine now.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.