2 Pages12> Go to Page...

Buzzing Microwave GE XL1800 Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: JVM1860WD001	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

diver19		#1 Posted : Monday, September 22, 2008 4:28:45 PM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 2		Unit has a buzzing noise as soon as you plug it in table doesn't turn and vent louver won't open on its own
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Tuesday, September 23, 2008 10:57:18 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Where this noise is coming from? Gene.
User Profile View All Posts by User View Thanks

diver19		#3 Posted : Tuesday, September 23, 2008 2:22:08 PM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 2		from behind the control panel
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, September 25, 2008 10:29:46 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Open the control panel and check all door switches. Look for an envelope with the tech sheets behind the top grille and post it. Here are the break down diagrams for the GE microwave Model JVM1860WD001 Gene.
User Profile View All Posts by User View Thanks

djman		#5 Posted : Thursday, May 14, 2009 12:18:03 PM(UTC)
Rank: Member Groups: Registered Joined: 5/14/2009(UTC) Posts: 1		check cap. C01 220uf 50 volt cap. opens allowing ac on the 24 volt dc contacts. the noise you hear is contact chatter.
User Profile View All Posts by User View Thanks

jd49		#6 Posted : Wednesday, August 17, 2011 6:48:06 PM(UTC)
Rank: Member Groups: Registered Joined: 8/17/2011(UTC) Posts: 2		C01 cap replacement that is. Got a dozen on ******** for $8.00 free shipping. Received them two days later. Popped it in - Works like new. Looks like this was your only post ! ! ! You are the DJMan ! ! !
User Profile View All Posts by User View Thanks

5_guy		#7 Posted : Tuesday, October 18, 2011 7:21:07 PM(UTC)
Rank: Member Groups: Registered Joined: 10/18/2011(UTC) Posts: 2		Since I stumbled across this Forum as my GE Spacemaker XL1800 is doing the exact same thing (buzzing sound, seems as if there not enough electricity) can someone point me in the direction as to where I can buy this C01 cap? As well as how to replace it since this seems to be the issue? Thanks in advance
User Profile View All Posts by User View Thanks

jd49		#8 Posted : Tuesday, October 18, 2011 8:01:23 PM(UTC)
Rank: Member Groups: Registered Joined: 8/17/2011(UTC) Posts: 2		Hope this works for you. I was so lucky to find this post. I got a dozen CAPs cheap on the site where you can bid for anything:cool:. Find C1 written on the printer circuit board. You will see the size and the specs 220uf 50 volt written on the side. Using a soldering iron, heat each connection to pop each off the board. Put a new one in the same holes - make sure you get - & + wires in right holes - and re-solder.
User Profile View All Posts by User View Thanks

5_guy		#9 Posted : Wednesday, October 19, 2011 7:29:55 AM(UTC)
Rank: Member Groups: Registered Joined: 10/18/2011(UTC) Posts: 2		Thanks for the info
User Profile View All Posts by User View Thanks

chas365		#10 Posted : Friday, March 1, 2013 3:46:15 PM(UTC)
Rank: Member Groups: Registered Joined: 3/1/2013(UTC) Posts: 1		Thank you, thank you, thank you, djman! I'm so glad I found this post. I would have been buying a new microwave otherwise. I got double-lucky and found an electronics distribution center in Springfield, OH (just a bit up the road). In a few hours I had the new cap installed and the microwave works great again!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

2 Pages12> Go to Page...