Rank: Member
Groups: Registered
Joined: 11/30/2014(UTC)
Posts: 2
|
I am trying to replace the Tub Boot, but after removing the agitator I cannot loosen the bolts holding the tub. The bolts seem to be very rusty and I see some rust around the center hub. Am I pursuing a fruitless cause? Can I cut the head of the bolts off and then replace them? Any tricks here?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
This is a 20+ year old machine and given where you say you have rust I think it is a cause that is better served by replacing the machine with a no frills basic top loader. You will be much happier for doing so, and this machine owes you nothing.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/30/2014(UTC)
Posts: 2
|
Thanks, that is kind of what I have come down to. I appreciate your comments.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
