Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool GBD307 Dead After Autoclean, Thermal fuses replaced
Options
Go to last post Go to first unread
Model: GBD307 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
leothe3  
#1 Posted : Monday, November 24, 2014 2:14:02 PM(UTC)
leothe3

Rank: Member

Groups: Registered
Joined: 11/24/2014(UTC)
Posts: 3
Hi All,

So, as it apparently happens a lot, after running the self-clean cycle the Whirlpool double oven died. I found 2 burned out thermal fuses. One at the panel and one for the top oven. Replaced both. Oven still dead. What else should I check? Could the control panel be dead? I do have power at the oven.

Thank you,

Leo
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Tuesday, November 25, 2014 1:09:34 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Your model number is incomplete.
Find your model number - AppliancePartsPros.com

How did you check for power?

Yes it could be the control board.
THIS FORUM IS DEAD!!!!!!!
Back to top
leothe3  
#3 Posted : Tuesday, November 25, 2014 11:27:29 AM(UTC)
leothe3

Rank: Member

Groups: Registered
Joined: 11/24/2014(UTC)
Posts: 3
The full model is GBD307PRS01
I checked for power at the control panel thermal fuse which seems to be the main power supply for the control panel. all the components of the control panel are cool, including the bridge rectifier.

I also checked the thermal probes and heating elements all check within specified Ohm ratings.

It seems to me it is the control panel. My thinking is that if something else was wrong with the fuses replaced at least the panel with lit up or beep but it's completely lifeless.

Thank you again for input. Any other ideas are welcome.
Back to top
denman  
#4 Posted : Tuesday, November 25, 2014 11:51:27 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
See the attachment for the tech sheet.

Sounds like you have checked it thoroughly sa all I can suggest is that you replace the control board.
File Attachment(s):
GBD307.pdf (505kb) downloaded 9 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
leothe3  
#5 Posted : Tuesday, November 25, 2014 1:50:09 PM(UTC)
leothe3

Rank: Member

Groups: Registered
Joined: 11/24/2014(UTC)
Posts: 3
Thank you very much for your help !!!
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET