Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool Oven-Microwave Combo
Options
Go to last post Go to first unread
Model: GMC275PRS01 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
sunilmathur  
#1 Posted : Friday, July 18, 2014 12:03:01 PM(UTC)
sunilmathur

Rank: Member

Groups: Registered
Joined: 7/18/2014(UTC)
Posts: 2
Hi,

The light in the microwave is no longer functional. Assuming that the bulb requires replacement, is this a DIY job? Are there any videos or instructions anywhere? I can see parts diagrams but from those, it is not clear how to go about opening the microwave up for the bulb replacement.

Thanks.

SM
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, July 19, 2014 2:57:36 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool GMC275PRS01 Wall Oven - AppliancePartsPros.com

[COLOR="Blue"]Assuming that the bulb requires replacement, is this a DIY job?[/COLOR]
Yes, depending on how handy you are.

Are there any videos or instructions anywhere?
No videos that I know of but you could try YouTube.
Click on the picture or description for the lens (Item 19 in Section 06) and the bulb (Item 53 in Section 06) and read the Q&A.
THIS FORUM IS DEAD!!!!!!!
Back to top
sunilmathur  
#3 Posted : Monday, November 10, 2014 1:06:43 PM(UTC)
sunilmathur

Rank: Member

Groups: Registered
Joined: 7/18/2014(UTC)
Posts: 2
Originally Posted by: denman Go to Quoted Post
Here are your parts
Parts for Whirlpool GMC275PRS01 Wall Oven - AppliancePartsPros.com

[COLOR="Blue"]Assuming that the bulb requires replacement, is this a DIY job?[/COLOR]
Yes, depending on how handy you are.

Are there any videos or instructions anywhere?
No videos that I know of but you could try YouTube.
Click on the picture or description for the lens (Item 19 in Section 06) and the bulb (Item 53 in Section 06) and read the Q&A.

Thanks Denman. I only got around to looking at the problem this weekend. I was able to figure out the removal of the two air vent grills behind which the screws holding the microwave were located. I was able to partially slide out the microwave and access the bulb.
Unfortunately, it turned out that the bulb was fine. I was able to test it with another 12v supply. My multimeter did not show any voltage on the pins of the bulb holder.
So, now I need to find some schematics and or wiring diagrams/pictures.
Back to top
denman  
#4 Posted : Tuesday, November 11, 2014 1:08:22 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
See the attachment for the tech sheet.

Be very, very careful when messing with a microwave.
The magnetron uses high voltage which is lethal.
File Attachment(s):
GMC275.pdf (763kb) downloaded 2 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Whirlpool oven-microwave combo (Oven Repair (including Ranges and Cooktops))
by spuddo 4/21/2009 3:59:24 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET