Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
tvlensman  
#1 Posted : Tuesday, September 9, 2014 4:23:21 PM(UTC)
tvlensman

Rank: Member

Groups: Registered
Joined: 6/19/2009(UTC)
Posts: 15

Can we match light the gas range top of this dual fuel (or any gas range) without the electric service? Seems it won't work on our just delivered but not electrified unit. Is there a super safety switch somewhere? Thanks, Michael
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Thursday, September 11, 2014 12:53:20 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
[COLOR="Blue"]Is there a super safety switch somewhere? [/COLOR]
Yes there is.
THIS FORUM IS DEAD!!!!!!!
tvlensman  
#3 Posted : Thursday, September 11, 2014 2:04:06 AM(UTC)
tvlensman

Rank: Member

Groups: Registered
Joined: 6/19/2009(UTC)
Posts: 15

Can I change it allow gas to flow, and mach light range top burners, during power outages? Didn't see any mention in the book... Thsnks
denman  
#4 Posted : Thursday, September 11, 2014 3:10:45 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for KDRS505XSS - AppliancePartsPros.com
Your model number is missing the last couple digits so you will have to choose one from the Matching Model Numbers section.

See the attachment for the tech sheet.

This is a safety device so I would not mess with it.
File Attachment(s):
KDRS505.pdf (678kb) downloaded 60 time(s).
THIS FORUM IS DEAD!!!!!!!
rjparker  
#5 Posted : Thursday, September 11, 2014 4:09:31 AM(UTC)
rjparker

Rank: Member

Groups: Registered
Joined: 9/10/2014(UTC)
Posts: 2

Your gas range top appears to have a gas "safety solenoid valve" that feeds the valve manifold. If so it requires power to operate. Other models of "spark" ignitor range top burners can light with a match unless they are solenoid controlled first.

If your unit is new the gas lines may not be purged of air yet.

Also the factory usually sets these for natural gas. If you are using propane the unit would need to be converted which involves the unit's pressure regulator and the burner gas orifices.
rjparker attached the following image(s):
safety valve.jpg
gas valve.jpg
Users browsing this topic
Guest (3)
Similar Topics
Kitchen Aid dual fuel, can I match light during power outage? (Oven Repair (including Ranges and Cooktops))
by tvlensman 9/9/2014 4:23:13 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.