Upper Oven Fails To Heat -control Panel Shows Oven On - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Upper Oven Fails To Heat -control Panel Shows Oven On Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KEBS208DSS11	Brand: Kitchen Aid	Age: More than 10 years
Previous Topic Next Topic

ssbbidask		#1 Posted : Friday, September 5, 2014 5:24:36 AM(UTC)
Rank: Member Groups: Registered Joined: 2/19/2011(UTC) Posts: 14		I am looking for someone to help troubleshoot an oven failure on my piece of junk Kitchenaid. First we are light cooks in my home. This oven probably got 2 years work in the past 10. That withstanding two years ago we decided to clean the oven. BIG MISTAKE. The mfg. (as is usual with wimpy warranties) is still in a state of denial publicly that they had an engineering defect in this unit. What this means to me is (1) replace thermal fuse in back, AND replace fuse in control panel, AND you guessed it - replaced the control panel because my use of the clean function blew everything up! Now 18 months later my upper oven in the double fails to heat. The control panel states it is on and nothing happens. What do I need to check to see where my issue lies? I have posted several times to this site with no answer. I have read on other ovens there is a resettable thermodisc behind control panel. Does this apply to mine?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Saturday, September 6, 2014 12:51:35 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for KitchenAid KEBS208DSS11 Oven - AppliancePartsPros.com See the attachment for the tech sheet. Since the unit stays in pre-heat and the other oven works OK I would start with the thermal fuse (item 37 in section 01). Remove power from the unit and check it with a meter, should be 0 ohms. If blown replace it. Then check that the blower works. Also use a thermometer in the oven to check the calibration to be sure it is not running hot. File Attachment(s): KEBS208.pdf (379kb) downloaded 7 time(s).
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

ssbbidask		#3 Posted : Sunday, September 7, 2014 3:47:12 PM(UTC)
Rank: Member Groups: Registered Joined: 2/19/2011(UTC) Posts: 14		Thanks. This helps me to troubleshoot this issue. I will follow up on what I find.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close