Rank: Member
Groups: Registered
Joined: 9/3/2014(UTC)
Posts: 2
|
I'm simply looking for information on how to remove the lower panel. Looks like it should simply pop loose at the top and swing down but apparently more to it than meets the eye. Would appreciate any pointers on opening this panel. Sounds like something is wrapped up in the motor, need to have a look see inside. Thank you in advance for any help.
Ed
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
Should be two clips in the groove between lower toe panel and door panel. Insert flatblade screwdriver or putty knife in where the clips are to release them, then tilt panel outward and lift from cabinet.
Eric
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/3/2014(UTC)
Posts: 2
|
Thank you @fairbank56, that was what I needed. Had to fight those clips more than expected but at least I know where to start. Sincerely appreciated
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
