Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
rickybobby858  
#1 Posted : Thursday, April 24, 2014 10:56:40 AM(UTC)
rickybobby858

Rank: Member

Groups: Registered
Joined: 9/3/2013(UTC)
Posts: 2

Machine was installed 7 years ago and water and power have been on but now we try to start and at first a little water came on in tub and it made funny noise and stopped then beeped. i removed water from tub and pulled rotor out and tried to free it up some then put it back togeather and still wont wash also now no water comes into tub? any ideas or know where i can find repair manual?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, April 25, 2014 4:16:13 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool KUDD01SSPA0 Dishwasher - AppliancePartsPros.com

I have never worked on one of these so cannot be of much use to you.

Below is a link to a manual.
You will have to join the site and be logged in to be able to download the manual.
http://appliancejunk.com...le&id=2;t=1398427778

Note that there is also a "4317427 KAD-10 Whirlpool 2008 Drawer Dishwasher Service Manual" in the dishwasher manuals section. It is for a KUDD03 but may have some info in it that would be helpful.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.