Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Refriderator stop working
Options
Go to last post Go to first unread
Model: TPX25PR Brand: GE Age: More than 10 years
Previous Topic Next Topic
Yuan  
#1 Posted : Sunday, March 30, 2014 11:46:57 AM(UTC)
Yuan

Rank: Member

Groups: Registered
Joined: 3/30/2014(UTC)
Posts: 9
My refrigerator/freezer just stopped working. Only the light inside the fridge still works but the fan and compressor do not. How to I determine if it is the defrost timer, relay, overload or compressor that is the problem?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Monday, March 31, 2014 3:28:44 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for TPX25PR - AppliancePartsPros.com

You are missing digits at the end so will have to choose the correct model from the Matching Model Numbers section.

[COLOR="Blue"] How to I determine if it is the defrost timer, relay, overload or compressor that is the problem?[/COLOR]
Since the condenser/compressor fan are both off it will not be the start relay or the overload as the compressor and fan are usually wired in parallel so neither part is getting power.

That leaves you with the control thermostat or the defrost timer.

Try moving the thermostat back and forth. If it fires up then it is the most likely cause.

If this does nothing.
Turn the defrost timer cam with a screwdriver. There is usually a hole in the cover that allows you to do this without dismantling the unit. If it fires up I would replace the timer.
THIS FORUM IS DEAD!!!!!!!
Back to top
Yuan  
#3 Posted : Monday, March 31, 2014 4:50:27 AM(UTC)
Yuan

Rank: Member

Groups: Registered
Joined: 3/30/2014(UTC)
Posts: 9
Thank you, Denman,

I moved the thermostat a bit and it worked!

Do I need to replace the thermostat now or will it happen again?

My GE Profile model number is TFX25PRYFWW.

Thanks again,

yuan
Back to top
denman  
#4 Posted : Monday, March 31, 2014 7:15:23 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
If it happened once, it will happen again so I would replace it.
THIS FORUM IS DEAD!!!!!!!
Back to top
Yuan  
#5 Posted : Monday, March 31, 2014 8:01:19 AM(UTC)
Yuan

Rank: Member

Groups: Registered
Joined: 3/30/2014(UTC)
Posts: 9
Is this the right replacement thermostat I should buy?

GE WR9X521 Control, Temp - AppliancePartsPros.com

My GE Profile model number is TFX25PRYFWW

I can find the defrost timer, but not sure about the thermostat.

Thanks again,

yuan
Back to top
denman  
#6 Posted : Monday, March 31, 2014 10:09:54 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Below are the parts for that unit
Parts for GE TFX25PRYFWW Refrigerator - AppliancePartsPros.com

The thermostat is item 424 in section 04.
Unfortunately it is no longer available.
Give the parts people a call to see if they have a substitute.
THIS FORUM IS DEAD!!!!!!!
Back to top
Yuan  
#7 Posted : Monday, March 31, 2014 11:10:33 AM(UTC)
Yuan

Rank: Member

Groups: Registered
Joined: 3/30/2014(UTC)
Posts: 9
Denman,

Thank you very much for your help!

yuan
Back to top
Yuan  
#8 Posted : Wednesday, April 9, 2014 3:43:12 PM(UTC)
Yuan

Rank: Member

Groups: Registered
Joined: 3/30/2014(UTC)
Posts: 9
I bought one from ******** and replaced the thermostat. The refrigerator is running, but the temperature is too low at 30F even when I move the adjustment to 1 on the scale 1-9.

Is it possible that the thermostat is defective? How do I test it?

Thanks,

Yuan
Back to top
denman  
#9 Posted : Thursday, April 10, 2014 1:07:29 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Is the unit cycling or is it on all the time?

If on all the time then it could be defective.
You could hold the end of the capillary tube on an ice cube to see if the thermostat's contacts open.

It is important that the capillary end be in the same place as the original.
You could try moving it closer to the freezer compartment to see if it will get more of the freezer temperature and therefore shut off sooner.
THIS FORUM IS DEAD!!!!!!!
Back to top
Yuan  
#10 Posted : Thursday, April 10, 2014 4:11:22 AM(UTC)
Yuan

Rank: Member

Groups: Registered
Joined: 3/30/2014(UTC)
Posts: 9
The unit is cycling.
Is the coil thing called capillary? It is confined in a frame in my model. I will try moving it to see the result.

Thanks again.
Back to top
Users browsing this topic
Guest (6)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET