Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Kitchen Aid Dishwasher won't start
Options
Go to last post Go to first unread
Model: KUDP01ILWH5 Brand: Kitchen Aid Age: 5 - 10 years
Previous Topic Next Topic
waveraider  
#1 Posted : Thursday, January 30, 2014 9:00:51 PM(UTC)
waveraider

Rank: Member

Groups: Registered
Joined: 2/19/2013(UTC)
Posts: 3
All lights light up accept start. Nothing happens when start is pushed. Any help is appreciated.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, February 1, 2014 1:59:39 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool KUDP01ILWH5 Dishwasher - AppliancePartsPros.com

See the attachment for the tech sheet.

Remove power from the unit.
Disconnect the control panel from the control board.
Check the start button output with a meter. See the tech sheet.

Sometimes it is just a dirty connection.
But as you can see the keys share circuit tracks (wires) so other keys woul also not work terefor I do not think this is yur problem.

If the start ket checks out OK then odds are that the control board is bad.
File Attachment(s):
KUDP01.pdf (1,009kb) downloaded 12 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
waveraider  
#3 Posted : Saturday, February 1, 2014 8:25:08 AM(UTC)
waveraider

Rank: Member

Groups: Registered
Joined: 2/19/2013(UTC)
Posts: 3
Yes I Just Had To Unhook The Ribbon Connector Then Plug It Back In
Back to top
waveraider  
#4 Posted : Tuesday, February 4, 2014 6:46:10 PM(UTC)
waveraider

Rank: Member

Groups: Registered
Joined: 2/19/2013(UTC)
Posts: 3
I've opened up the control pannel and unhooked the board. That has worked twice now but only for one wash each time I unhooked it. Then I get no lights at the start button again. Does this sound like control board or touch pannel should be replaced?

Thanks
Back to top
denman  
#5 Posted : Tuesday, February 4, 2014 11:31:23 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Sounds more like a control board problem.

It is best to check the start key with a meter.
If it checks out OK then the odds are higher that it is the control board.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Kitchen Aid Dishwasher won't start - has power (Dishwasher Repair)
by kizzy 3/2/2010 3:20:55 PM(UTC)
Kitchen Aid Dishwasher Won't start (Dishwasher Repair)
by Moses 6/4/2009 5:11:02 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET