Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Maytag washer won't spin fast enough
Options
Go to last post Go to first unread
Model: MAV2755AWW Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
ProfKenn  
#1 Posted : Thursday, November 21, 2013 6:18:07 PM(UTC)
ProfKenn

Rank: Member

Groups: Registered
Joined: 11/21/2013(UTC)
Posts: 10
Maytag washer won't spin very fast during the spin cycle. I changed the thrust bearing but when I manually try to turn the wheel counter clockwise the tub won't move. Seems it might be something in the brake or the brake isn't engaging or something. Thanks.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Appliance Ninja  
#2 Posted : Thursday, November 21, 2013 6:28:43 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
When you replaced that pulley kit, did you get one of the washers on the very bottom before the C clip was put on?
Back to top
ProfKenn  
#3 Posted : Thursday, November 21, 2013 6:44:00 PM(UTC)
ProfKenn

Rank: Member

Groups: Registered
Joined: 11/21/2013(UTC)
Posts: 10
Yes, got the thick washer on there.
Back to top
ProfKenn  
#4 Posted : Thursday, November 21, 2013 6:45:07 PM(UTC)
ProfKenn

Rank: Member

Groups: Registered
Joined: 11/21/2013(UTC)
Posts: 10
Can't get both the thick and one thin one on there.
Back to top
Appliance Ninja  
#5 Posted : Thursday, November 21, 2013 6:55:19 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
Thank you. Was the pulley kit replaced because of this problem initially? When you turn the pulley, does it keep turning even though the tub does not or does it stop?
Back to top
ProfKenn  
#6 Posted : Thursday, November 21, 2013 7:04:19 PM(UTC)
ProfKenn

Rank: Member

Groups: Registered
Joined: 11/21/2013(UTC)
Posts: 10
Yes, pulley keeps turning even though tub does not. I can push the little cam that is underneath the c-clip and washer with a screwdriver to where it seems to "lock" and the tub will turn very slowly. Otherwise it won't turn at all.
Back to top
Appliance Ninja  
#7 Posted : Thursday, November 21, 2013 7:08:57 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
Did you put lubricant between the two plastic cams when installing the kit? When you turn the pulley, can you see the white cam travel down in the center of the pulley?
Back to top
ProfKenn  
#8 Posted : Thursday, November 21, 2013 7:11:49 PM(UTC)
ProfKenn

Rank: Member

Groups: Registered
Joined: 11/21/2013(UTC)
Posts: 10
Yes, lubed both pieces. Cam moves with the pulley, it does not remain stationary. I have to manually move it.
Back to top
ProfKenn  
#9 Posted : Thursday, November 21, 2013 7:18:48 PM(UTC)
ProfKenn

Rank: Member

Groups: Registered
Joined: 11/21/2013(UTC)
Posts: 10
For whatever reason, the pulley is not moving upwards. I can spin the pulley freely but it doesn't engage the transmission.
Back to top
Appliance Ninja  
#10 Posted : Thursday, November 21, 2013 7:23:15 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
Did you get the white cam in correctly? It really has no choice but to drive the pulley up when the pulley is turned.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Maytag washer won't spin fast enough (Washer Repair)
by dster 1/6/2014 7:06:08 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET