4 Pages<1234> Go to Page...

Double Wall Oven will not heat up Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: J KP45W0A2WW	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

Appliance Ninja		#21 Posted : Wednesday, November 20, 2013 1:56:02 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		I have verified that the part number I gave you is correct for your model number. You received part number WB27T10282, correct? It is not uncommon for there to be extra, unused connections because those controls may fit many different models with features yours may not have.
User Profile View All Posts by User View Thanks

jwmingus		#22 Posted : Wednesday, November 20, 2013 2:06:42 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 21		Yes that is the number I received. will try
User Profile View All Posts by User View Thanks

Appliance Ninja		#23 Posted : Wednesday, November 20, 2013 2:10:19 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		Great, let me know how it goes!
User Profile View All Posts by User View Thanks

jwmingus		#24 Posted : Wednesday, November 20, 2013 2:34:22 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 21		Have one quick issue. Black marked as C on old board, no such place on new board.
User Profile View All Posts by User View Thanks

Appliance Ninja		#25 Posted : Wednesday, November 20, 2013 2:43:26 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		There should have been a wiring instruction sheet with the control showing where that goes, depending on the style of control you have. Did you get a look at them?
User Profile View All Posts by User View Thanks

jwmingus		#26 Posted : Wednesday, November 20, 2013 3:00:58 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 21		My bad, I bought elsewhere and no Sheet. I have the Original tech sheet. The difference is the OPEN connection on the new board is marked COM1, on the old board this wire came from C The wire label is B-12
User Profile View All Posts by User View Thanks

Appliance Ninja		#27 Posted : Wednesday, November 20, 2013 3:06:59 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		That sheet is available below. CLICK HERE
User Profile View All Posts by User View Thanks

jwmingus		#28 Posted : Wednesday, November 20, 2013 3:23:39 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 21		Awesome - Shown on E - and F note the connection C is no longer on the new panel..
User Profile View All Posts by User View Thanks

jwmingus		#29 Posted : Wednesday, November 20, 2013 3:31:05 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 21		[IMG]https://mail.google.com/mail/?ui=2&ik=20d9c5d003&view=fimg&th=142780bf3846c71e&attid=0.1&disp=inline&safe=1&attbid=ANGjdJ9HBfDg0PIO-_YivSlo_zNjGWOnT9DvQ-_wRMGdw43QNNcM9Bwy7va2S-B04l75hMvJAVFQ2azy2cR-VtuCxhIF6awxP6VlgaDZALTOYUw5bALlFVw6MTtp0Iw&ats=1384993691469&rm=142780bf3846c71e&zw&sz=w1243-h424[/IMG] C connected on Far Right here on old board. New board label of Com1 open ?
User Profile View All Posts by User View Thanks

Appliance Ninja		#30 Posted : Wednesday, November 20, 2013 3:36:05 PM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		The black should go to COM1 in that diagram. Do you have blacks to all those connections as shown in figure E?
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

4 Pages<1234> Go to Page...