Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
KitchenAid Superba Oven No Heat
Options
Go to last post Go to first unread
Model: KEBC207KWH03 Brand: Kitchen Aid Age: More than 10 years
Previous Topic Next Topic
manykids2788  
#1 Posted : Friday, October 25, 2013 5:47:12 PM(UTC)
manykids2788

Rank: Member

Groups: Registered
Joined: 10/25/2013(UTC)
Posts: 3
Have a Superba double oven. The top oven stopped working. No error codes or anything. Just no heat. Tried regular, broil and convection. Fan kicks on in convection mode.

Pulled the oven out and tested the round fuse on the back - the one that blows in cleaning mode. It is good.

Now what????
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, October 27, 2013 1:20:11 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool KEBC207KWH03 Wall Oven - AppliancePartsPros.com

See the attachment for your tech sheet.

If the unit stays in preheat then odds are that the control board is shot.
I would check that the common wire that goes from the control board to all 3 elements is OK.
When you checked the thermal fuse did you disconnect at least one side of it? This ensures that you do not read an alternate/parallel circuit path.
Also use the most sensitive meter scale on your meter so you can see that it is actually zero ohms.

It could be that the DLB relay's contacts or the electronics that control the relay are bad.

If the unit shows that it is ready then it could be an oven sensor problem or again a control board problem.
File Attachment(s):
KEBC207.pdf (351kb) downloaded 13 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
manykids2788  
#3 Posted : Sunday, October 27, 2013 7:02:17 PM(UTC)
manykids2788

Rank: Member

Groups: Registered
Joined: 10/25/2013(UTC)
Posts: 3
I pulled the front off. There is a component that had pulled partially off and burned off a wire. I need a new control board. Where can I get the right one?
Back to top
denman  
#4 Posted : Sunday, October 27, 2013 11:09:29 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Part number: AP5665061
Part number: AP5665061


Click on the picture for more info
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (2)
Similar Topics
kitchenaid superba oven no heat (Oven Repair (including Ranges and Cooktops))
by ebo2112 7/23/2014 10:16:23 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET