F1-8 Code, disconnected touchpad ribbon, then F1-7 error code - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

F1-8 Code, disconnected touchpad ribbon, then F1-7 error code Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JGS8850ADQ	Brand: Jenn-Air	Age: 5 - 10 years
Previous Topic Next Topic

sstark		#1 Posted : Tuesday, October 1, 2013 8:57:01 AM(UTC)
Rank: Member Groups: Registered Joined: 10/1/2013(UTC) Posts: 2		My oven shows the F1-8 error code which would indicate that the "control" must be replaced. Which control? The touchpad or the ERC (clock)? I read that that there is a way to determine which control should be replaced. First, disconnect the ribbon from the touchpad. Then, put the control panel back in place and plug in. If the F1 error code comes back, replace the ERC. If the F1 error code does not come back, replace the touch pad. Well, I did this and I got the F1-7 (not the F1-8) error code with the touch pad ribbon disconnected. I am assuming this indicates that I should replace the ERC. Does that sound right? Looking for some confirmation before I spend a couple hundred bucks. Thanks!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

konarocks		#2 Posted : Monday, September 1, 2014 8:41:23 AM(UTC)
Rank: Member Groups: Registered Joined: 9/1/2014(UTC) Posts: 2		Originally Posted by: sstark My oven shows the F1-8 error code which would indicate that the "control" must be replaced. Which control? The touchpad or the ERC (clock)? I read that that there is a way to determine which control should be replaced. First, disconnect the ribbon from the touchpad. Then, put the control panel back in place and plug in. If the F1 error code comes back, replace the ERC. If the F1 error code does not come back, replace the touch pad. Well, I did this and I got the F1-7 (not the F1-8) error code with the touch pad ribbon disconnected. I am assuming this indicates that I should replace the ERC. Does that sound right? Looking for some confirmation before I spend a couple hundred bucks. Thanks! Does anyone have an answer for this question?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close