Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
Theresa&Ken  
#1 Posted : Wednesday, September 11, 2013 12:55:44 PM(UTC)
Theresa&Ken

Rank: Member

Groups: Registered
Joined: 9/11/2013(UTC)
Posts: 3

KUDS02SRSS dishwasher. I'm stumped. About 5 weeks ago the washer stopped working. I ordered a new board and installed. The washer worked, but then the soap dispenser did not work. I got help from rep Kecia, and it was decided that because the dispenser worked up until the board failed, the new board must be faulty. Appliance Parts replaced the board. The dispenser still did not work. I ordered a new dispenser but it doesn't open with either board either. I've checked continuity of the wiring and from what I know about the multi-meter there is continuity (it buzzes). I've run the service diagnostics cycle and the dispenser does not open. There are no dishes or anything in the washer. There is nothing flashing or blinking. Where do I go from here? Do I have the correct board?

Please help and Thank You.

On another issue, prior to the board and dispenser problem, there used to be an energetic drying fan and lots of steam coming out the vent. I haven't heard the fan in awhile and no steam comes out of the vent, and the dishes are not as dry as when the fan worked. Do you have any information about the drying fan. I saw comments about the fan for this model in only one online discussions but cannot find it now.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
HumboldtRepairMan  
#2 Posted : Wednesday, September 11, 2013 5:20:29 PM(UTC)
HumboldtRepairMan

Rank: Member

Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 916

Sounds like you ordered the wrong control board, didn't connect all the connectors in the right spots, or have a bad dispensor...........Continuity test the dispensor should read 0.00.........if not you have a bad dispensor if you do dispensor is ok........take the front panel off and run the unit through diagnostics on your tech sheet and take a volt meter and make sure you get 120v at the soap dispensor during the cycles test........
kitchen aid dishwasher soap dispenser not opening - YouTube
Theresa&Ken  
#3 Posted : Thursday, September 12, 2013 8:37:48 AM(UTC)
Theresa&Ken

Rank: Member

Groups: Registered
Joined: 9/11/2013(UTC)
Posts: 3

We'll give that a try. Thanks!
iodisaSaf  
#4 Posted : Saturday, September 14, 2013 3:21:55 AM(UTC)
iodisaSaf

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 0

Hi! I've recently discovered faboulous traitement de l'acné
iodisaSaf  
#5 Posted : Saturday, September 14, 2013 3:25:44 AM(UTC)
iodisaSaf

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 0

Hey everyone! Welcome to our website. I've recently found faboulous acné
iodisaSaf  
#6 Posted : Saturday, September 14, 2013 3:28:01 AM(UTC)
iodisaSaf

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 0

Hey everyone! Please visit our website! I've recently come across fantastic acné
iodisaSaf  
#7 Posted : Saturday, September 14, 2013 3:31:04 AM(UTC)
iodisaSaf

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 0

Hello! Come to our website. I've recently discovered marvelous traitement de l'acné
iodisaSaf  
#8 Posted : Saturday, September 14, 2013 3:33:51 AM(UTC)
iodisaSaf

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 0

Good day. Please visit our website! I've recently come across astomishing traitement de l'acné
iodisaSaf  
#9 Posted : Saturday, September 14, 2013 3:35:36 AM(UTC)
iodisaSaf

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 0

Hey I've recently found fantastic traitement de l'acné
iodisaSaf  
#10 Posted : Saturday, September 14, 2013 3:37:08 AM(UTC)
iodisaSaf

Rank: Member

Groups: Registered
Joined: 9/14/2013(UTC)
Posts: 0

Hello I've recently found wonderful traitement de l'acné
Users browsing this topic
Guest (8)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.