Will fill, but it won't agitate, spin or drain Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LSR6332KQ1	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

ed0410		#1 Posted : Tuesday, December 4, 2007 8:10:06 AM(UTC)
Rank: Member Groups: Registered Joined: 12/4/2007(UTC) Posts: 1		When I close the top cover, the water level starts to fill up. After that nothing happen. There is weird noise like something is trying to crank up but it won't. What could it be? Thanks.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

TechnicianBrian		#2 Posted : Tuesday, December 4, 2007 10:46:45 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/2/2007(UTC) Posts: 769		The most likely cause would be a broken lid switch. If that is working and you are actually hearing a low whine from the bottom front, I would suspect something stuck in the pump locking up the motor. TechnicianBrian
User Profile View All Posts by User View Thanks

abbie		#3 Posted : Tuesday, December 4, 2007 1:59:34 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 11/15/2007(UTC) Posts: 189		it sounds like there is something stuck in the pump,this would cause the washer not to drain,also cause a load on the motor which inturn would cause the strange noise.
User Profile View All Posts by User View Thanks

morrisoninc		#4 Posted : Tuesday, December 11, 2007 7:20:07 AM(UTC)
Rank: Member Groups: Registered Joined: 12/11/2007(UTC) Posts: 2		My kenemore washer will not rinse spin or spin and the water just sit's there, what could be causing this problem and what will it cost to get it fix
User Profile View All Posts by User View Thanks

morrisoninc		#5 Posted : Tuesday, December 11, 2007 8:16:52 AM(UTC)
Rank: Member Groups: Registered Joined: 12/11/2007(UTC) Posts: 2		is there anyone that can assisted me with my washer not spinning
User Profile View All Posts by User View Thanks

TechnicianBrian		#6 Posted : Tuesday, December 11, 2007 12:54:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/2/2007(UTC) Posts: 769		Try starting a new thread with your model number so we can get you some help TechnicianBrian
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)