Washer belt keeps coming off of pulley. Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

josh fatouros		#1 Posted : Wednesday, July 31, 2013 5:40:56 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2012(UTC) Posts: 14		Try to wash cloths and washer agitates and works until final spin. Won't spin belt comes off of the pulley and motor. Why does this happen.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

sidfink43		#2 Posted : Saturday, August 3, 2013 2:57:34 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		If you will post a model number so we can see exactly what machine you have someone may be able to help you. Thanks
User Profile View All Posts by User View Thanks

josh fatouros		#3 Posted : Saturday, August 3, 2013 3:53:30 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2012(UTC) Posts: 14		The model number is gleh1642ds1
User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Saturday, August 3, 2013 3:58:58 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		It is possible that the belt has stretched, but more likely the pulley is defective. Try replacing both the belt and the pulley assembly and see if that does not solve the problem.
User Profile View All Posts by User View Thanks

josh fatouros		#5 Posted : Saturday, August 3, 2013 4:03:33 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2012(UTC) Posts: 14		When I install the belt. If I center it on the pulley it rides on the outer most edge of the motor pulley grooves.
User Profile View All Posts by User View Thanks

josh fatouros		#6 Posted : Saturday, August 3, 2013 4:07:01 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2012(UTC) Posts: 14		I can see if the belt stretched but how does the pulley go bad it's aluminum . Are there any bearings that allow the belt not to line up. Is there any adjustment on the motor to align the pulleys. Thanks for your help!
User Profile View All Posts by User View Thanks

sidfink43		#7 Posted : Saturday, August 3, 2013 4:18:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Yes to both points. Aluminum as you know can easily warp and it only takes a few mm of warp to throw it off and let the belt come off. Here is a link to the service manual for your model. http://www.emaservicetips.com/p...thTumbleActionWasher.pdf You may have to replace the pulley on spec because the problem may be so small that it is not visible to the naked eye.
User Profile View All Posts by User View Thanks

josh fatouros		#8 Posted : Saturday, August 3, 2013 4:24:00 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2012(UTC) Posts: 14		Thanks for your help. I will look at the service manual. I will order a pulley and belt and hopefully that takes care of the problem. I have been scratching my head on this one, because the pulley looks just fine. Thanks for everything.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)