Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Maytag gas dryer will not heat
Options
Go to last post Go to first unread
Model: MGD5870TW0 Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
jsweeyor  
#1 Posted : Tuesday, October 2, 2012 12:15:23 PM(UTC)
jsweeyor

Rank: Member

Groups: Registered
Joined: 10/2/2012(UTC)
Posts: 2
I am trying to fix the problem with the gas dryer. I replaced the igniter and gas coils a week ago and the dryer worked fine for a few days. Now the igniter will not glow and I am having trouble figuring out why. I have tested the igniter, coils, thermostats and they all have continuity. What am I missing.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Tuesday, October 2, 2012 2:36:18 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

When you are checking the thermostats do you take off one wire?
You didn't list the fuse and flame sensor in the parts you've checked.
Set the timer to timed regular and check continuity at T-WB, BK-BU, BK-R, T-W.
At the heat switch contacts 1-4 closed.

Here are the breakdown diagrams and Replacement parts for Maytag MGD5870TW0 29" GAS DRYER | AppliancePartsPros.com

Post the results.

Simon.
Back to top
jsweeyor  
#3 Posted : Tuesday, October 2, 2012 2:55:25 PM(UTC)
jsweeyor

Rank: Member

Groups: Registered
Joined: 10/2/2012(UTC)
Posts: 2
I checked the flame sensor but I can not find a fuse. I also pulled the wires on the thermostats, but will check the timer settings you suggest.
Back to top
vgorilla  
#4 Posted : Tuesday, June 18, 2013 6:22:34 PM(UTC)
vgorilla

Rank: Member

Groups: Registered
Joined: 6/18/2013(UTC)
Posts: 2
I'm having the same issue with my Maytag Gas Dryer MGD5700TQ0
It stopped heating on sensor dry first, now timed dry is working intermittently.

I checked the terminals you suggested T-WB, BK-BU, BK-R, T-W. They were all close to 0 except for T-WB, which was 30 ohms. Is this right?

This is at a tenant's house, so I don't have much first hand experience of the problem.

I checked impedance on ignitor, thermostats, and fuse and all looked good.

After I got it all back together, I ran it on timed dry and then the flame ran for about 2 minutes, then started cycling on and off. However there were no clothes in the dryer so this may be the correct behavior.

Does this sound like timer, coils, or something else?
Back to top
Simon / APP Team  
#5 Posted : Wednesday, June 19, 2013 4:36:24 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

What was the original problem? What you are describing is a normal sequence.Do not test the dryer with out any wet clothing inside.

Simon.
Back to top
vgorilla  
#6 Posted : Wednesday, June 19, 2013 5:41:55 PM(UTC)
vgorilla

Rank: Member

Groups: Registered
Joined: 6/18/2013(UTC)
Posts: 2
The problem is not heating on sensor dry, and sometimes not heating on timed dry. Unfortunately, I didn't test it with wet clothes. I'm sure I'll hear soon if it is still not working properly. Will update then.. Thanks.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Maytag Gas Dryer will not heat up fully - princeton (Dryer Repair)
by brian.frasco@gmail.com 12/26/2008 1:28:44 PM(UTC)
maytag gas dryer will not heat after initial burn (Dryer Repair)
by Agustin 8/27/2007 3:21:24 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET