Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
No Water Circulation
Options
Go to last post Go to first unread
Model: PDW8400J03BB Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
jlupfer  
#1 Posted : Tuesday, May 14, 2013 3:58:38 AM(UTC)
jlupfer

Rank: Member

Groups: Registered
Joined: 5/14/2013(UTC)
Posts: 16
I can hear dishwasher filling with water, but circulation pump does not start after inlet valve closes. After doing nothing for a couple minutes, the dishwasher drains. I tried adding extra water before starting the dishwasher, and the circulation worked two times, so I thought the problem was the inlet valve. I cleaned the float, but now the circulation pump won't start even when I add extra water. Is this a problem with the control panel?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, May 14, 2013 3:37:37 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hello,

Are you sure it will start to drain just 2-3 minutes after it filled with water?

Gene.
Back to top
jlupfer  
#3 Posted : Tuesday, May 14, 2013 3:58:08 PM(UTC)
jlupfer

Rank: Member

Groups: Registered
Joined: 5/14/2013(UTC)
Posts: 16
Thank you for your question. Yes, I am certain it is a matter of minutes. I verified by looking in the sink drain and seeing the water spraying into the drain.
Back to top
Gene  
#4 Posted : Tuesday, May 14, 2013 4:34:34 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Run the dishwasher in the service mode as instructed in the attached file and activate the circulation (main) pump. If the pump would not activate, remove the toe panel and check for 120 VAC to the pump motor. Post the results.

Here are the breakdown diagrams and Parts for GE PDW8400J03BB Dishwasher - AppliancePartsPros.com

Gene.
File Attachment(s):
PDW 8200 - 8400 - 8500 - 8600 Service mode.doc (455kb) downloaded 13 time(s).
Back to top
jlupfer  
#5 Posted : Wednesday, May 15, 2013 3:54:39 AM(UTC)
jlupfer

Rank: Member

Groups: Registered
Joined: 5/14/2013(UTC)
Posts: 16
I ran the test, and the pump ran for about a minute and then shut off.
Back to top
Gene  
#6 Posted : Wednesday, May 15, 2013 4:36:10 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
So the circulation pump is good. Sounds like the control module is the culprit.

- The control module Part number: WD21X10215
Part number: WD21X10215



Gene.
Back to top
jlupfer  
#7 Posted : Thursday, May 16, 2013 10:22:04 AM(UTC)
jlupfer

Rank: Member

Groups: Registered
Joined: 5/14/2013(UTC)
Posts: 16
thank you. I will order the module and give it a try.
Back to top
Gene  
#8 Posted : Thursday, May 16, 2013 12:38:15 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Keep us posted.

Gene.
Back to top
jlupfer  
#9 Posted : Wednesday, May 22, 2013 2:20:53 AM(UTC)
jlupfer

Rank: Member

Groups: Registered
Joined: 5/14/2013(UTC)
Posts: 16
It appears that Gene's diagnosis is correct, and that the control board needed to be replaced. Here are some comments about this forum, and the order with appliancepartspros.com:
-The forum (Gene) was very helpful with ideas on testing the dishwasher
-I ordered the part on Thursday, and received the delivery the next day...FAST!
-The replacement of the board took about 30 minutes
-Two runs of the dishwasher, and so far, so good
Back to top
Gene  
#10 Posted : Wednesday, May 22, 2013 3:40:17 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
I'm glad it's up and running.

Thank you for the feedback and your good words.

Gene.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
No water circulation Bosch SHY 56a (Dishwasher Repair)
by mark Thomas 3/2/2009 9:33:06 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET