Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Jawin  
#1 Posted : Tuesday, March 26, 2013 5:09:34 AM(UTC)
Jawin

Rank: Member

Groups: Registered
Joined: 3/26/2013(UTC)
Posts: 3

It started with not spinning the water from the clothes. It pumps the water out when spinning and does spin fast enough to remove the water.

I used a different cycle than usual and it did spin out the water. When we try to do an actual wash in this cycle it wants to fill and wash at the same time.

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fairbank56  
#2 Posted : Tuesday, March 26, 2013 6:04:52 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Faulty load sense switch. A very high failure item on this washer.

Eric
Jawin  
#3 Posted : Tuesday, March 26, 2013 6:53:23 AM(UTC)
Jawin

Rank: Member

Groups: Registered
Joined: 3/26/2013(UTC)
Posts: 3

Your link is to a Temperature Switch is this the same as the Load Sense Switch?

Thanks for the reply.
fairbank56  
#4 Posted : Tuesday, March 26, 2013 7:21:39 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Yes, it's a combination temp and water level controller.

Eric
Jawin  
#5 Posted : Tuesday, March 26, 2013 7:28:24 AM(UTC)
Jawin

Rank: Member

Groups: Registered
Joined: 3/26/2013(UTC)
Posts: 3

Appreciate it. I was afraid when we bought this thing the load sensing feature would be a problem.

Thanks again.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.