Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
dangole104  
#1 Posted : Monday, February 18, 2013 7:22:38 PM(UTC)
dangole104

Rank: Member

Groups: Registered
Joined: 2/18/2013(UTC)
Posts: 1

Hey everyone. First time forum user. I'm hoping I've come to the right place to resolve my appliance issues.
As the title states, I have a Kenmore Range/Oven that is on the blink. Stovetop works fine, as does the clock/control panel (or so it seems). I got to the back of the control panel, turned on the bake and I got 120v at both the bake and the broil leads, so I'm guessing power is getting in/out of the clock/control unit. I'm really tired of cooking things in our toaster oven so if anyone hear can tell me the solution, or point me in the direction of where to start I'd greatly appreciate it.

Thanks in advance.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, February 19, 2013 2:42:33 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Kenmore Range 79092429302 - AppliancePartsPros.com

Here is the wiring diagram
http://manuals.frigidaire.com/p...pringfield/316255311.pdf

Odds are that the control board is shot.

I would check that the control/timer does not show that the oven is ready.
If it does this then it could be an oven sensor problem re: the unit already thinks it is at set point so does not heat up.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.