Oven door won't open fully on GE slide-in oven JSP38GV1BB - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Oven door won't open fully on GE slide-in oven JSP38GV1BB Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JSP38GV1BB	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

Al Thumbs		#1 Posted : Monday, February 11, 2013 9:49:38 AM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2010(UTC) Posts: 8		Gentlemen, The oven door opens about halfway and then stops. There is firm resistance to opening further. I don't see any obstructions. What to do? If it's hinges, how do I check? Thanks for your expertise. Al Thumbs


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Al Thumbs		#2 Posted : Tuesday, February 12, 2013 5:11:26 AM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2010(UTC) Posts: 8		I found a video on YouTube that shows how to replace the hinge in my oven. This video is applicable to similar GE ovens that use hinge WB14X103 (left hinge) and WB14X104 (right hinge). Video is here: GE Oven/Stove/Range Hinge with Roller - Left Side Replacement (Part # WB14X103) - YouTube It's an easy fix: Tilt the door to the broiler position and lift it off the hinges. Remove the storage drawer at the bottom of the oven. The hinge springs are accessible on left and right. Unhook the spring from the hinge, taking note of which hole the spring is hooked in. Unscrew three screws from the front of the hinge, visible on the front side of the oven. Lift out the hinge. Reverse to install the new hinge. Easy-peasy. Let's keep these old appliances running!


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Tuesday, February 12, 2013 5:08:16 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hello Al, Just wanted to say thank you for sharing your repair with us. Your post will help other people with a similar problem. Thanks again and good luck with your oven. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close