Kitchenaid icemaker dispenses crushed but not cubed Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KSRP25FNBL00	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

garymcgill		#1 Posted : Tuesday, February 5, 2013 2:58:44 PM(UTC)
Rank: Member Groups: Registered Joined: 1/30/2013(UTC) Posts: 9		Dispenses crushed ice but not cubed....is it the solenoid? The motor only turns in one direction.....if so is it accessible thru the front tray?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Tuesday, February 5, 2013 4:47:20 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. The access to the motor is from the inside of the freezer door. Locate the motor cover under the ice shoot, remove two screws holding it, next remove 4 screws holding the motor. Here are the breakdown diagrams and Motor and Ice Container parts for Whirlpool KSRP25FNBL00 - AppliancePartsPros.com Simon.
User Profile View All Posts by User View Thanks

garymcgill		#3 Posted : Wednesday, February 6, 2013 2:43:33 PM(UTC)
Rank: Member Groups: Registered Joined: 1/30/2013(UTC) Posts: 9		Thanks, I removed the 2 screws but do not see the other 4 that you speak of....do I need to pry off the motor cover to expose them? I tried that but found the cover very hard to remove and m afraid of cracking the housing.
User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Wednesday, February 6, 2013 3:42:40 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. I'm attaching this link. Hope it'll help. Simon. File Attachment(s): Removing and reinstalling the motor (in-door ice).doc (622kb) downloaded 37 time(s).
User Profile View All Posts by User View Thanks

garymcgill		#5 Posted : Saturday, February 9, 2013 7:56:33 AM(UTC)
Rank: Member Groups: Registered Joined: 1/30/2013(UTC) Posts: 9		Thanks, I removed the motor and measured the presence of 120 DC on the rd/wht br/wht wires when running crushed ice but no voltage across those same wires when switching to cubed ice. I don't think it's the motor now. I think it's the rectifier or what ever switches the polarity to the motor. Any ideas or suggestions?
User Profile View All Posts by User View Thanks

garymcgill		#6 Posted : Saturday, February 9, 2013 8:57:23 AM(UTC)
Rank: Member Groups: Registered Joined: 1/30/2013(UTC) Posts: 9		Also, I removed the brn/wht red /wht wires from the terminal that goes to the motor and reversed them thinking I'd get the motor to give cubes when requesting crushed ice but still I get crushed ice and no cubes...this is not what I expected....any ideas?
User Profile View All Posts by User View Thanks

Simon / APP Team		#7 Posted : Monday, February 11, 2013 10:25:44 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. If you taped down the freezer door switch while testig then most likely you need to replace the dispenser control board Part number: W10184871 Good luck. Post the results. Simon.
User Profile View All Posts by User View Thanks

garymcgill		#8 Posted : Tuesday, February 12, 2013 11:35:21 AM(UTC)
Rank: Member Groups: Registered Joined: 1/30/2013(UTC) Posts: 9		Originally Posted by: Simon / APP Team Hi. If you taped down the freezer door switch while testig then most likely you need to replace the dispenser control board Part number: W10184871 Good luck. Post the results. Simon. Thanks, do you have a description on how to remove that part?
User Profile View All Posts by User View Thanks

Simon / APP Team		#9 Posted : Tuesday, February 12, 2013 1:35:50 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. If you look at the outside bottom edge of the frame you should see two small slots. Use flat screwdriver to pry the frame off and then lift it out.Use the towel to preserve the door from scratching. Unplug the fridge while working on it. Simon.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)