Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
how do I remove control module from Bosch dishwasher
Options
Go to last post Go to first unread
Model: SHE44C05UC Brand: Bosch Age: 1 - 5 years
Previous Topic Next Topic
Gene  
#11 Posted : Tuesday, January 22, 2013 9:38:23 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Go to my post from 09/30/2010. Click on the link and go through the thread. You'll find everything.

Gene.
Back to top
OsageBeachKat  
#12 Posted : Tuesday, January 29, 2013 8:03:27 AM(UTC)
OsageBeachKat

Rank: Member

Groups: Registered
Joined: 1/29/2013(UTC)
Posts: 2
MANY of the Bosch dishwashers have a recall on the Control Module's that Bosch pays to have repaired. Mine is...repairman is coming next Monday!

The link to check:

Bosch Home Appliances

I realize that this could be an older thread, but *I* came across it searching for answers, so others may too. =)
Back to top
wilkatsa  
#13 Posted : Saturday, February 9, 2013 12:57:54 PM(UTC)
wilkatsa

Rank: Member

Groups: Registered
Joined: 2/9/2013(UTC)
Posts: 4
I can easily get the door and panel off my Bosch dishwasher but cannot budge the plastic module housing, nor can I separate the stainless steel outer fascia from the inner piece (assuming that is necessary).

I have full access to the back of the module but can't get it out to swap for the new one!

Any suggestions?
Back to top
Gene  
#14 Posted : Saturday, February 9, 2013 2:54:42 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is the complete model number of the dishwasher?

Gene.
Back to top
wilkatsa  
#15 Posted : Saturday, February 9, 2013 3:31:05 PM(UTC)
wilkatsa

Rank: Member

Groups: Registered
Joined: 2/9/2013(UTC)
Posts: 4
Gene, Thanks so much for the response! It is SHU6805UC/U12. It's a stainless model and I got the door cover and upper panel off no problem.

On the back side of the upper panel that houses the module I can easily see and access the rear of the module and the wires/plugs... however I cannot figure out how to get the darned module out!

Do I need to separate the the stainless outer fascia of that upper panel from the piece holding the module, door handle mechanism, etc.?

If so, how? And does the module comes out the front?

Any guidance will be GREATLY appreciated! All the videos I've seen are for other units that don't look at all like mine.

P.S. just FYI the reason for all this: it freezes at 1 minute and never drains. I bought a new module online and hope to change it myself.
Back to top
Gene  
#16 Posted : Saturday, February 9, 2013 3:54:32 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Click on the following link for instructions: http://forum.appliancepartspros...86-bosch-dishwasher.html

BTW, this link has been posted on the previous page of this thread.

Gene.
Back to top
wilkatsa  
#17 Posted : Saturday, February 9, 2013 5:00:12 PM(UTC)
wilkatsa

Rank: Member

Groups: Registered
Joined: 2/9/2013(UTC)
Posts: 4
Thanks, I saw that. But... I was unable to locate "the four locking tabs" you referred to. I will look again.
Back to top
Users browsing this topic
Guest (5)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET