Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE Monogram side by side standalone Dead! Please help
Options
Go to last post Go to first unread
Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
chrisko  
#1 Posted : Sunday, February 3, 2013 5:46:27 PM(UTC)
chrisko

Rank: Member

Groups: Registered
Joined: 2/3/2013(UTC)
Posts: 3
Hello,

I have a ge monogram stainless freestanding refrigerator that just totally died except for the light when you open the door.
I don't have the model or serial as the stickers were removed. It looks exactly the same as today's monogram model.

The motherboard is EBX1005G01 Rev. L
I read that this board has lots of issues. I checked out both side and don't see any bad spots. I'm also wondering if its the fan as the coil was covered with dust and dirt.

Any help would be appreciated.

Thanks,
Chris
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, February 4, 2013 4:33:18 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Chris,

It is impossible to provide any accurate advice without the complete model number. Look inside the refrigerator at the top shelf or at the sealing.

Gene.
Back to top
Simon / APP Team  
#3 Posted : Monday, February 4, 2013 4:34:59 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi, Chris.

Without the model number I won't be much of a help.

But based on what you posted I think you should replace the main control board.

Simon.
Back to top
chrisko  
#4 Posted : Monday, February 4, 2013 6:00:25 PM(UTC)
chrisko

Rank: Member

Groups: Registered
Joined: 2/3/2013(UTC)
Posts: 3
I have a board and fan on the way. I took the fan out and tried applying it 11v DC and it does not work. Hopefully the fan and board get this up and running.

Thanks,
Chris
Back to top
Gene  
#5 Posted : Tuesday, February 5, 2013 12:22:08 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Good luck. Keep us posted.

Gene.
Back to top
chrisko  
#6 Posted : Tuesday, February 5, 2013 12:42:35 PM(UTC)
chrisko

Rank: Member

Groups: Registered
Joined: 2/3/2013(UTC)
Posts: 3
I got the model number from the store i purchased it from.

ZFSB23DNSS
Back to top
Gene  
#7 Posted : Tuesday, February 5, 2013 12:53:49 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Thank you Chris.

Unplug the refrigerator. Remove the cover from the main control board on the back of the refrigerator. Remove the wire from the J11 terminal. Attach the voltmeter probes to that wire and the wire at the J7-9 connector.

Plug the refrigerator back and measure the voltage.

If the reading is about 120 VAC, replace the main control board.

If the reading is incorrect then the problem is with the power cord or outside the refrigerator.

- The main control board Part number: WR49X10152
Part number: WR49X10152



Gene.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET