My Bosch SHE46C06UC won't fill with water. Cycle tries to start up, lights come on control panel, but no water flows in. Anybody else have this problem? Unit was purchased in 2007.

Following up on my own post. The filter on the water inlet valve was clogged. Needed to install a new one. Bosch valve part number 607335. Found the part on an online auction site that starts with "E" for $23 with free shipping. (Half the price that was quoted by the repair company.) Still needed to pay the repair company for the service call. Hope this helps anybody else with this or a similar problem.

The inlet valve is right behind the lower front panel left hand side. Two screws and a small ajustable wrench and a pair of plires and you could do it in 5 or 10 minutes. Had to replace one myself.
If you want step by step instructions go to http://www.********************...ng-Element/480317/935753
The first few steps is how to get to the lower panel This could save you a few bucks. They wanted $180 just to walk in the front door to fix mine

Thanks for the tips regarding my repair. It's all fixed now but I'll remember them for next time. (Our water here is awful. That filter will clog up again for sure.)

How are you doing with your dishwasher's hot water problem?

Watch the video you recommended and do the valve replacement yourself! I bought the part online at a famous auction site (can't give the name or it will be blacked out). I paid $23.10 with free shipping. It took about a week to get here. You need Part # 607335. The seller's name was *buyitnow*. Search that auction site using the words Bosch 607335 Valve. You'll find it. Cheaper than a service call, which around is a minimum of $75.