Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
danoe2  
#1 Posted : Thursday, January 3, 2013 8:24:32 AM(UTC)
danoe2

Rank: Member

Groups: Registered
Joined: 1/3/2013(UTC)
Posts: 3

about 1 year old and just quit working. I have checked power connection beneath kick plate, good connections and power coming to dishwasher.

Checked door switches for continuity - 0 ohms
checked fuse for continuity - 0 ohms

I am not sure where to go from here. tried Google as far as what steps I should take next but didn't come up with much.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, January 4, 2013 12:23:08 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
A model number may help others help you.
Find your model number - AppliancePartsPros.com
THIS FORUM IS DEAD!!!!!!!
danoe2  
#3 Posted : Monday, January 7, 2013 3:01:49 PM(UTC)
danoe2

Rank: Member

Groups: Registered
Joined: 1/3/2013(UTC)
Posts: 3

sorry bout that.
here it is.

MDB6709AWW0

Thanks
denman  
#4 Posted : Tuesday, January 8, 2013 3:36:17 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Maytag MDB6709AWW0 Dishwasher - AppliancePartsPros.com

Do you have the tech sheet?
It is often behind the kick plate.

I am assuming that the unit is totally dead (shows no sign of life).

If you have 120 volts between P2 and P6 on the control board then odds are that the control board is toast.
THIS FORUM IS DEAD!!!!!!!
danoe2  
#5 Posted : Tuesday, January 8, 2013 5:07:20 AM(UTC)
danoe2

Rank: Member

Groups: Registered
Joined: 1/3/2013(UTC)
Posts: 3

so I am NOT supposed to have 120 between P2 and P6? ok

I do have the tech sheet and will check that out tonight
after work.

Thanks much
denman  
#6 Posted : Thursday, January 10, 2013 2:05:50 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
[COLOR="Blue"]so I am NOT supposed to have 120 between P2 and P6?[/COLOR]
No, you are supposed to have it there.
It is the power that runs the DC power supply on the board.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.