Thermador XLO burners not lighting - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Thermador XLO burners not lighting Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GGSCV365	Brand: Thermador	Age: More than 10 years
Previous Topic Next Topic

jmcookiii		#1 Posted : Monday, November 26, 2012 5:48:31 PM(UTC)
Rank: Member Groups: Registered Joined: 11/25/2012(UTC) Posts: 2		One of the XLO burners will not light. I want to replace the potentiometers and the part referenced is #189816 is no longer available. From the posts on this forum, it seems these have been replaced by new part numbers possibly more than once. Can anyone give me the correct part numbers? These are now being sold in kits with the simmer control module, I assume to make sure the potentiometers match the simmer control module. I would rather replace the potentiometers (less than a $20 part vs the kit approx $150-$160) but not sure of the kit part number either. The serial number of my unit is 93120015 Model number is GGSCV365 I have had no replies to earlier posts:(


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Tuesday, November 27, 2012 5:02:18 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Are you sure that the potentiometer is the culprit? Did you perform any troubleshooting? If you did not then I would recommend to do it before you will order any parts. The instructions are attached to the post. Here are the breakdown diagrams and Parts for Thermador GGSCV365 Cooktop - AppliancePartsPros.com Gene. File Attachment(s): XLO burners troubleshooting.doc (267kb) downloaded 168 time(s).


User Profile View All Posts by User View Thanks

jmcookiii		#3 Posted : Tuesday, November 27, 2012 7:18:48 PM(UTC)
Rank: Member Groups: Registered Joined: 11/25/2012(UTC) Posts: 2		Yes, the traces are burned on the board. The diagram and parts shown is what I referenced in my question above. The part number 189816 is shown as no longer available. From other posts on this forum it seems that it was replaced by #422748 and that one may also be replaced.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, November 28, 2012 6:06:45 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I would replace the potentiometer first in spite of Thermador recommends to replace the simmer control module together with the potentiometers. The potentiometer Part number: 422748 you posted is correct. The simmer control kit Part number: 497234 Gene.


User Profile View All Posts by User View Thanks

Guest		#5 Posted : Thursday, August 4, 2022 10:46:01 AM(UTC)
Rank: Guest Groups: Registered Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		HI Gene, Can you confirm that the part 422748 is the correct replacement for 00189816 on a Thermador model PSC484GG 48" professional series cooktop? In addition to Thermador saying to replace theis with the simmer control too, they say that you will need to replace all the potentiometers at the same time too. I really appreciate your help and advice


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close