Ice Not Dispensing on Door Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GE PSW26MSTDSS	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

aggie2012		#1 Posted : Wednesday, November 7, 2012 11:27:21 AM(UTC)
Rank: Member Groups: Registered Joined: 11/7/2012(UTC) Posts: 4		My ice maker is working like a champ, but the door dispenser stopped working. Normally when I push the button on the door with a glass, I hear the ice maker churning and ice falls down the chute and into my glass. Now I hear absolutely nothing. It is completely silent. Any thoughts or advice would be greatly appreciated. Thanks
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

rickgburton		#2 Posted : Friday, November 9, 2012 1:13:47 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/21/2012(UTC) Posts: 263		Check the micro-switch in the dispenser for continuity rickgburton attached the following image(s):
User Profile View All Posts by User View Thanks

aggie2012		#3 Posted : Friday, November 9, 2012 1:23:50 PM(UTC)
Rank: Member Groups: Registered Joined: 11/7/2012(UTC) Posts: 4		Thanks Rick. I can get to the switch, but how do you test for continuity? I can tell you that the water on the door still works, but not every time. Sometimes I need to push my glass against the lever several times to make the water come out. I will never come out. Should I just buy a new switch? How much do they cost? Thanks again.
User Profile View All Posts by User View Thanks

rickgburton		#4 Posted : Friday, November 9, 2012 1:50:31 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/21/2012(UTC) Posts: 263		Go to the top of this page and select the "Find Parts" tab then input your model number. Select freezer door sub menu.
User Profile View All Posts by User View Thanks

aggie2012		#5 Posted : Tuesday, January 8, 2013 7:13:41 AM(UTC)
Rank: Member Groups: Registered Joined: 11/7/2012(UTC) Posts: 4		I finally got around to this and the new switch didn't solve the issue. Same issue of no water & no ice being dispensed. Thoughts? Bad solenoid or bad board? Any guidance would be appreciated. Thanks
User Profile View All Posts by User View Thanks

rickgburton		#6 Posted : Tuesday, January 8, 2013 10:02:55 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/21/2012(UTC) Posts: 263		No ice or water sounds like the user interface board part# WR55X10631
User Profile View All Posts by User View Thanks

aggie2012		#7 Posted : Tuesday, January 8, 2013 10:14:13 AM(UTC)
Rank: Member Groups: Registered Joined: 11/7/2012(UTC) Posts: 4		Thanks Rick. Any way to know if it is the main board vs. the user interface board? I'd like to get this fixed asap. The lights on the control panel selector seem to work just fine and don't disappear when I try to get ice or water. Does the user interface board control other things as well?
User Profile View All Posts by User View Thanks

rickgburton		#8 Posted : Tuesday, January 8, 2013 10:41:46 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/21/2012(UTC) Posts: 263		Check out this service flash I was able to locate while I look for a wiring diagram. File Attachment(s): GE SXS Service Flash 9 pin and 6 pin connectors.pdf (101kb) downloaded 7 time(s).
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (8)