GE XL44 Gas oven not firing - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

GE XL44 Gas oven not firing Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JGBP26WEA6WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

Joe Mitch		#1 Posted : Tuesday, October 16, 2012 11:43:18 AM(UTC)
Rank: Member Groups: Registered Joined: 10/16/2012(UTC) Posts: 4		Hello, my GE XL44 oven stopped working, the range top works fine. I have searched the forum and I see that I am not the first person to have this issue. I ordered/received/installed a new oven ignitor however the oven still does not work. I read the manual and it suggested that the gas may not be flowing to the oven but the switch is in the open position. Any help would be greatly appreciated. Thank you Model# jgbp26wea6ww


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Tuesday, October 16, 2012 1:57:25 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Does the broil works? Was it a round ignitor that you replaced? Unplug the unit, get to the control board, plug it in, turn the bake on and using the multimeter check for 120VAC between BK and N. If correct voltage present check the wire harness and with unit off check the continuity at the bake contacts of the safety gas valve Part number: WB19K14 Replace if contacts are open. If there is no voltage present at the control board contacts BK and N - replace the clock Part number: WB27K10143 Here are the breakdown diagrams and Control Panel & Cooktop parts for GE JGBP26WEA6WW - AppliancePartsPros.com Post the results. Simon.


User Profile View All Posts by User View Thanks

Joe Mitch		#3 Posted : Tuesday, October 16, 2012 2:34:07 PM(UTC)
Rank: Member Groups: Registered Joined: 10/16/2012(UTC) Posts: 4		Broil does not work. Yes I replaced the round ignitor. I will do the testing that you suggested Thank you very much


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Tuesday, October 16, 2012 3:33:34 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Most likely it's the clock, but don't replace it with out checking first. Simon.


User Profile View All Posts by User View Thanks

Joe Mitch		#5 Posted : Tuesday, October 16, 2012 3:50:36 PM(UTC)
Rank: Member Groups: Registered Joined: 10/16/2012(UTC) Posts: 4		Just wondering, why would the clock prevent the oven from firing and not the burners? Thank you again


User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Tuesday, October 16, 2012 4:30:38 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. The clock doesn't control the burners. Simon.


User Profile View All Posts by User View Thanks

Joe Mitch		#7 Posted : Tuesday, October 16, 2012 4:33:58 PM(UTC)
Rank: Member Groups: Registered Joined: 10/16/2012(UTC) Posts: 4		So the clock controls the oven?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close