Dacor Double Oven Won't Heat - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Dacor Double Oven Won't Heat Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MCS230	Brand: Dacor	Age: 5 - 10 years
Previous Topic Next Topic

krawfo		#1 Posted : Friday, September 14, 2012 2:32:37 AM(UTC)
Rank: Member Groups: Registered Joined: 9/14/2012(UTC) Posts: 3		I cleaned both ovens a couple of days ago. When I tried to use the lower oven today, it would not heat. This occurs with BAKE and BROIL settings. The upper oven works fine. On BAKE, I set the temperature, it shows PRE- BAKE on and temp. Reads 135. I can also hear what I think are 2 separate sounds of relays (?) clicking. Any help would be much appreciated.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Friday, September 14, 2012 4:59:04 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Check if the hi-limit cut off is open, located near the lower latch and it's resettable. Simon.


User Profile View All Posts by User View Thanks

krawfo		#3 Posted : Saturday, September 15, 2012 3:31:36 AM(UTC)
Rank: Member Groups: Registered Joined: 9/14/2012(UTC) Posts: 3		Simon, thanks for the reply. I should have mentioned in my post that I did check the high limit switch.


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Monday, September 17, 2012 9:54:06 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Most likely this is a bad lower oven relay board Part number: 82985 Also, check the harness between the clock and the relay board. Simon.


User Profile View All Posts by User View Thanks

krawfo		#5 Posted : Monday, September 17, 2012 4:34:24 PM(UTC)
Rank: Member Groups: Registered Joined: 9/14/2012(UTC) Posts: 3		Simon, thanks for the reply. Would it be worthwhile to do a continuity check on the high limit switch before ordering this part? When I checked it previously I only pressed the reset button. Thanks again.


User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Monday, September 17, 2012 7:05:05 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. I assumed that you checked the continuity. Please do so. Simon.


User Profile View All Posts by User View Thanks

brianmch		#7 Posted : Saturday, December 6, 2014 9:33:55 AM(UTC)
Rank: Member Groups: Registered Joined: 12/6/2014(UTC) Posts: 1		I checked both elements for continuity...passed. Hi limit is under top shroud. Is it to lock in? I press it and it doesn't lock. It's center red button flush with its sides. Maybe bad? First post, thx for the help you all have been so far and on other things. Brian


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close