Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
buddyb123  
#1 Posted : Thursday, July 12, 2012 9:10:30 AM(UTC)
buddyb123

Rank: Member

Groups: Registered
Joined: 7/12/2012(UTC)
Posts: 1

Does the GD27DQXFW00 have a start device on the compressor? I only see the overload relay in the parts listing? The refrig/freezer stopped working, clicking from the compressor. From reading this forum it seems that the logical place to start would be the start device, but I don't see it in the part blow-up. Thank you.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Thursday, July 12, 2012 12:39:06 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Use this kit. Read the instructions.
Do not forget to cool down the compressor before turning it on.
Clean the condenser coils while you are there.

Start components Part number: 4387835
Part number: 4387835


Here are the breakdown diagrams and Replacement parts for Whirlpool GD27DQXFW00 SIDE-BY-SIDE REFRIGERATOR | AppliancePartsPros.com

Thank you. Post the results.

Simon.
richappy  
#3 Posted : Friday, July 13, 2012 12:54:43 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You only have one start device (ptc) shown. It is a small, black item with spade terminals. If this is the same as your original one, just wire it up as the old one was. If you failed to note which wires whent were,let me know.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.