Maytag will not agitate,but will pump out and spin - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Maytag will not agitate,but will pump out and spin Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LAT9304AAE	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

willnise		#1 Posted : Wednesday, June 13, 2012 11:34:51 AM(UTC)
Rank: Member Groups: Registered Joined: 5/8/2012(UTC) Posts: 12		:(what will cause the motor to hum but will not agitate,it will pump out water and spin,but will not agitate


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Wednesday, June 13, 2012 3:04:28 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. First of all check if the motor will run without the belts. If the problem is still there - pull out the timer, take the cover off and check all the contacts for burns and discolorations. See if you can clean the contacts with the finest sand paper. Reassemble and try. Doesn't work - replace the timer. The timer Part number: 22001255 Here are the breakdown diagrams and Replacement parts for Maytag LAT9304AAE WASHER-TOP LOADING \| AppliancePartsPros.com Thank you. Post the results. Simon. PS. You can alwais return any unused parts even if they been installed.


User Profile View All Posts by User View Thanks

willnise		#3 Posted : Thursday, June 14, 2012 11:40:51 AM(UTC)
Rank: Member Groups: Registered Joined: 5/8/2012(UTC) Posts: 12		Thank you Simon/APP Team I took off the belts and the motor just hum,when I turned the shaft and the motor started running but it will not start on it's own.So I think I need a new motor.


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Thursday, June 14, 2012 12:14:54 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Most likely it's the motor but still there is the chance that the timer is bad. Get both of them and return unused one. The APP will take it back even if you installed it. Thank you. Simon. PS. There is the wiring diagram in the parts breakdown It's #8.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close