lights come on oven wont heat up - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

lights come on oven wont heat up Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GLEFS77CSC	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

fxe81hd		#1 Posted : Thursday, May 3, 2012 12:43:28 PM(UTC)
Rank: Member Groups: Registered Joined: 5/3/2012(UTC) Posts: 3		push the putton for the oven and the lights come on and shows it's preheating and it the element doesn't heat up. the broiler fuchsion does the same


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Thursday, May 3, 2012 12:58:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts, includes wiring diagrams. Replacement parts for Frigidaire GLEFS77CSC Frigidaire/electric Range \| AppliancePartsPros.com Do the stove top elements work correctly? If no it is probably a power problem. If yes then your control board is probably shot. I would unplug the unit and check that the wires to and from the elements and line cord are OK. Could be one of them that is common to both elements is burned off.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

fxe81hd		#3 Posted : Thursday, May 3, 2012 1:02:34 PM(UTC)
Rank: Member Groups: Registered Joined: 5/3/2012(UTC) Posts: 3		Originally Posted by: denman Here are your parts, includes wiring diagrams. Replacement parts for Frigidaire GLEFS77CSC Frigidaire/electric Range \| AppliancePartsPros.com Do the stove top elements work correctly? If no it is probably a power problem. If yes then your control board is probably shot. I would unplug the unit and check that the wires to and from the elements and line cord are OK. Could be one of them that is common to both elements is burned off. yes the top works fine. i will check that thanks


User Profile View All Posts by User View Thanks

fxe81hd		#4 Posted : Saturday, May 5, 2012 4:15:33 AM(UTC)
Rank: Member Groups: Registered Joined: 5/3/2012(UTC) Posts: 3		Originally Posted by: fxe81hd yes the top works fine. i will check that thanks i checked for burned wires and they all look good, checked continuity of the elements and that seemed good. have power to the elements and coming out the other end. stumped at this point.


User Profile View All Posts by User View Thanks

denman		#5 Posted : Saturday, May 5, 2012 5:08:12 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		You are probably checking the power to the elements incorrectly. You will see in the wiring diagram that on side of each element is connected to L2 out on the control board. This may have 120 volts on it all the time or whenever the oven is on.. Then the other side of each element is attached to a control relay (switches in L1) on the control board. FYI: The elements run off 240 volts and do not use Neutral/ground. The way it works is that you have two 120 volt supplies (L1 to Neutral and L2 to Neutral) these are 180 degrees out of phase. So when one is at positive 120 volts, the other is at negative 120 volts. So you end up with 240 volts (L1 to L2) and this is what powers the elements.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close