Rank: Member
Groups: Registered
Joined: 4/20/2012(UTC)
Posts: 6
|
Hello all and thanks for helping me out. I have a GE Profile model # PDS22SFSBLSS. For the last few months ive noticed a knocking/clicking sound coming from the fridge. Naturally i ignored it like an idiot :( Last night i come home to find the temp control is out, no led readings for the freezer or refrigerator. Hitting any of the buttons doesnt do anything. I have power to the fridge as the light comes on when the door is open. All the food is shot and temp is warm in both fridge and freezer. Can anyone suggest what part or parts i might need please?
Much appreciated folks!
Thank you.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Zaksbro, A clicking or knocking noise from the fridge, usually doesn't involve the control assembly, but. You'll need to check for power into and out of the "motherboard" in the back of the fridge. Part number: AP4436216
Here's some help: Good Luck and Thanks,
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi. Most likely the problem is main control board. It's located at the back, behind cover plate. When installing the new board read the instructions. You may need to make some adjustments. The main control board Part number: WR55X10942
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/17/2012(UTC)
Posts: 5
|
Sounds like my problem that I just fixed, see post "Not cooling, New main board"
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/20/2012(UTC)
Posts: 6
|
Thanks everyone. I ordered the main board today. I will report back. Hopefully this takes care of it.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/20/2012(UTC)
Posts: 6
|
Would anyone know what voltages I should be reading on the main control board? The schematic doesn't seem to show it. I'm reading 124v in and between 40-46volts on all the jumper pins I can get to on the top of the board.
Thanks again.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/20/2012(UTC)
Posts: 6
|
Hi there. So I swapped out the main board and waiting for temps to drop. One thing: I did not see any green wire to cut or a capacitor plastic housing. My model has a black capacitor with 2 wires ( neither are green). Am I ok??
Thanks again.
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi.
Carefully read the instructions included with the control board.You will find all the answers.
Simon.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/20/2012(UTC)
Posts: 6
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: zaksbro  Zaksbro, Your OK. Follow the instructions as it applies to your refrigerator and you'll do fine. This motherboard kit is designed to replace the control board on several versions and date ranges on the refrigerators, that use this system. You're doing fine,
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
