Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
mljdd  
#1 Posted : Thursday, April 19, 2012 11:02:49 AM(UTC)
Quote
mljdd

Rank: Member

Groups: Registered
Joined: 4/19/2012(UTC)
Posts: 5

My compactor ram is stuck in the down position.I took the side off and found that the white plastic gear(model #882699) was broken in half. I tried grabbing the chain to see if I could manually move it by hand but the chain is very tight and would not budge...is the chain supposed to be that tight or is something stuck? My question is if I put this new gear on and the ram is stuck, will it break the new gear? Im not sure how to manually get the ram back to the up position.

Any help is greatly appreciated.

Thanks...Mike
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, April 19, 2012 12:37:40 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Mike,

You have to check both power nuts (#13 at the diagram). If any one is bad, it will cause the ram to stuck. Also both power nuts, power screws and gears have to be lubricated.

- The power nut Part number: 9870163
Part number: 9870163



- The drive gear kit Part number: 882699
mljdd  
#3 Posted : Thursday, April 19, 2012 12:57:43 PM(UTC)
Quote
mljdd

Rank: Member

Groups: Registered
Joined: 4/19/2012(UTC)
Posts: 5

Thanks for the help Gene....i will work on it wheh i get home. How hard is it to getto the power nuts?
mljdd  
#4 Posted : Thursday, April 19, 2012 1:01:43 PM(UTC)
Quote
mljdd

Rank: Member

Groups: Registered
Joined: 4/19/2012(UTC)
Posts: 5

I meant how hard to get to the power nuts?
Gene  
#5 Posted : Thursday, April 19, 2012 1:39:02 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You have to remove the top cover and the ram. Be careful not to damage the top limit switch.

Gene.
mljdd  
#6 Posted : Thursday, April 19, 2012 4:55:51 PM(UTC)
Quote
mljdd

Rank: Member

Groups: Registered
Joined: 4/19/2012(UTC)
Posts: 5

Sounds hard specially with the ram being stuck
mljdd  
#7 Posted : Friday, April 20, 2012 7:02:12 AM(UTC)
Quote
mljdd

Rank: Member

Groups: Registered
Joined: 4/19/2012(UTC)
Posts: 5

Hey Gene, how do you know if the power nuts are bad? Can I manually lift the ram back up and how?

Thanks again....Mike
Gene  
#8 Posted : Friday, April 20, 2012 12:10:56 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Mike,

You may want to remove the top cover (at least) and look inside first. You may find some answers there.

Gene.
P.S. You can bring the ram up by turning the powerscrew nut (#8 at the diagram) using an adjustable wrench.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.