kenmore washer 417.42042100 wont spin or agitate - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

kenmore washer 417.42042100 wont spin or agitate Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

assartorp		#1 Posted : Monday, April 2, 2012 7:32:57 AM(UTC)
Rank: Member Groups: Registered Joined: 4/2/2012(UTC) Posts: 3		My kenmore washer 417.42042100 front load has abruptly stopped agitating or spinning. I have checked the door locks and checked that the pump is draining. The timer appears to be working and the washer fills and drains but will not turn. The motor does not appear to be engaging when the timer reaches the agitate or spin cylcles. Do I need a new speed controller?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Monday, April 2, 2012 2:45:35 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: assartorp ...I have checked the door locks... How did you do it? Gene.


User Profile View All Posts by User View Thanks

assartorp		#3 Posted : Monday, April 2, 2012 4:30:22 PM(UTC)
Rank: Member Groups: Registered Joined: 4/2/2012(UTC) Posts: 3		I closed the door and clicked through the cycles on the dial. The washer filled and drained but didn't agitate or spin. When the timer came to the end it was once again possible to open the door. I also opened and closed the detergent drawer while in operation which would start and stop operation. Is there another/better way to check the door lock?


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Monday, April 2, 2012 5:34:09 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Yes. You have to measure the resistance across the wax motor (the orange piece on the right side at the following picture) terminals. The normal reading suppose to be about 1500 Ohms. If the reading is incorrect, replace it. - The door lock assembly Part number: AP4455026 Gene.


User Profile View All Posts by User View Thanks

assartorp		#5 Posted : Tuesday, April 3, 2012 10:52:26 AM(UTC)
Rank: Member Groups: Registered Joined: 4/2/2012(UTC) Posts: 3		alright, I will have a try tomorrow. Any tips on dismantaling the swithch?


User Profile View All Posts by User View Thanks

Gene		#6 Posted : Tuesday, April 3, 2012 11:07:41 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: assartorp alright, I will have a try tomorrow. Any tips on dismantaling the swithch? The instructions are attached. Gene. File Attachment(s): Removing the door safety switch.doc (430kb) downloaded 31 time(s).


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close