Please help identify a part - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Please help identify a part Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JDB2100AWB	Brand: Jenn-Air	Age: 1 - 5 years
Previous Topic Next Topic

Yaya		#1 Posted : Monday, March 16, 2009 3:03:18 PM(UTC)
Rank: Member Groups: Registered Joined: 3/16/2009(UTC) Posts: 2		I am having a very difficult time identifying this part. I cannot find it on the schematic for this particular model number. I've ordered a couple of different parts, but they're not the right ones. This part holds the tines up. Without it, the tine that hold the plates on the middle/lower rack fall to the sides. I appreciate any help you can offer. Barbara Here is a pic of the part: http://im1.shutterfly.co...r%3D0/rx%3D720/ry%3D480/


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Monday, March 16, 2009 5:19:58 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for JENN-AIR JDB2100AWB \| AppliancePartsPros.com Check out Item 5 in the "Rail & rack" section. Looks like it should be for the lower and middle racks. Click on the picture to get better views.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Yaya		#3 Posted : Tuesday, March 17, 2009 3:20:24 AM(UTC)
Rank: Member Groups: Registered Joined: 3/16/2009(UTC) Posts: 2		Originally Posted by: denman Here are your parts Replacement parts for JENN-AIR JDB2100AWB \| AppliancePartsPros.com Check out Item 5 in the "Rail & rack" section. Looks like it should be for the lower and middle racks. Click on the picture to get better views. I've ordered that part and it is not what I need. That part holds the racks in place, but doesn't keep the tines from splaying out when a plate is added. Thanks for your help. B


User Profile View All Posts by User View Thanks

denman		#4 Posted : Tuesday, March 17, 2009 4:59:33 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		If you look at the parts list Item 4 in "rail and rack" section does say that it is a latch for the tines. Unfortunately there are two of them and no pictures so I cannot even say if it is the correct part, let alone let you know which is the correct one. May be best to take the part with you to a local Jenn-Air / Maytag parts supplier and try to get a replacement. That way you will know for sure that it is the correct one. A good parts desk person may be able to just look at it and get you the correct part.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close