Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
motor replacement on Dw
Options
Go to last post Go to first unread
Model: DWU9302AAB Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
jpyra  
#1 Posted : Thursday, March 12, 2009 2:38:17 AM(UTC)
jpyra

Rank: Member

Groups: Registered
Joined: 3/2/2009(UTC)
Posts: 3
I need to replace the motor/pump assembly. Can I remove the old one from inside the tub ? It looks like a twist out, but I want to make sure
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
TechnicianBrian  
#2 Posted : Thursday, March 12, 2009 5:41:04 AM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
The pump is removed from inside the tub and is held in place by a lock ring under the tub. The ring will rotate to the side and release the tabs holding the motor in place. Disconnect the hose and wires connections, then turn the lock ring and push the pump up into the tub.
Back to top
jpyra  
#3 Posted : Monday, March 16, 2009 2:23:08 AM(UTC)
jpyra

Rank: Member

Groups: Registered
Joined: 3/2/2009(UTC)
Posts: 3
:) Thanks, Brian for your advice. It was easier getting off than back on. A few leaks later, and all seems well[
Back to top
TechnicianBrian  
#4 Posted : Monday, March 16, 2009 5:21:27 AM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769
Glad it worked out for you.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET